Effect of ZnO with Different Specific surface area on the Cure Characteristics and Mechanical Properties of Carbon Black-filled NR/SBR Compounds

被引：0
|
作者：
Brodska, A. [1 ]
Hrdlicka, Z. [1 ]
Kuta, A. [1 ]
机构：
[1] Prague Inst Chem Technol, Fac Chem Technol, Dept Polymers, CR-16628 Prague 6, Dejvice, Czech Republic
来源：
KGK-KAUTSCHUK GUMMI KUNSTSTOFFE | 2012年 / 65卷 / 09期
关键词：
Zinc oxide; Rubber; Activator; specific surface Area; SULFUR VULCANIZATION;
D O I：
暂无
中图分类号：
TQ [化学工业];
学科分类号：
0817 ;
摘要：
Zinc oxide significantly influences the properties of rubber, both in terms of processing parameters of rubber compounds, and physical-mechanical properties. This paper presents a comparison of five types of zinc oxide with different Specific surface area. Using these types of ZnO, compounds combining NR and SBR were prepared. These compounds were vulcanized at 150 degrees C. Tensile properties, solvent swelling and hardness of the cured compounds were investigated. According to the obtained results, for similar formulations, it is possible to reduce the ZnO dosage down to 2 phr, which could be economically advantageous and could help to solve some environmental problems as well.
引用
收藏
页码：45 / 48
页数：4
相关论文
共 50 条
  • [1] Influence of mastication on properties of carbon black-filled NR compounds
    Choi, SS
    KOREA POLYMER JOURNAL, 2000, 8 (02): : 73 - 79
  • [2] Impact of mixing procedure on phase morphology and fracture mechanical properties of carbon black-filled NR/SBR blends
    Matthias Wunde
    Manfred Klüppel
    Continuum Mechanics and Thermodynamics, 2017, 29 : 1135 - 1148
  • [3] Impact of mixing procedure on phase morphology and fracture mechanical properties of carbon black-filled NR/SBR blends
    Wunde, Matthias
    Klueppel, Manfred
    CONTINUUM MECHANICS AND THERMODYNAMICS, 2017, 29 (05) : 1135 - 1148
  • [4] ULTRASONIC AIDED EXTRUSION OF CARBON BLACK-FILLED SBR COMPOUNDS
    Choi, Jaesun
    Isayev, Avraam I.
    RUBBER CHEMISTRY AND TECHNOLOGY, 2011, 84 (01): : 55 - 73
  • [5] Investigation of cure behaviour and tensile properties of NR/SBR composite filled with carbon black and silica
    Seshaiah, Nagam
    Kumar, Narava Santhosh
    Afrid, Mahamad Khadar Hussain
    Sriram, Katta
    Vinay, Kandregula
    Rahul, Boyidi Sekhar
    MATERIALS TODAY-PROCEEDINGS, 2022, 59 : 387 - 391
  • [6] Preblending effect of biblends on properties of the carbon black-filled rubber compounds
    Choi, SS
    KOREA POLYMER JOURNAL, 2001, 9 (01): : 37 - 44
  • [7] Influence of cooling time between mixing stages on properties of carbon black-filled NR compounds
    Choi, SS
    KOREA POLYMER JOURNAL, 1999, 7 (04): : 244 - 249
  • [8] Strain dependence of dynamic mechanical properties of carbon black-filled rubber compounds
    Ulmer, JD
    RUBBER CHEMISTRY AND TECHNOLOGY, 1996, 69 (01): : 15 - 47
  • [9] Effects of Blend Ratio and SBR Type on Properties of Carbon Black-Filled and Silica-Filled SBR/BR Tire Tread Compounds
    Sae-oui, Pongdhorn
    Suchiva, Krisda
    Sirisinha, Chakrit
    Intiya, Wenussarin
    Yodjun, Pram
    Thepsuwan, Uthai
    ADVANCES IN MATERIALS SCIENCE AND ENGINEERING, 2017, 2017
  • [10] Mechanical properties of carbon black-filled polymeric concrete
    Rejon, L
    Ponce, MA
    VazquezPolo, G
    Castano, VM
    ADVANCED COMPOSITES LETTERS, 1996, 5 (04) : 121 - 124
12345