Effects of Sintering Temperature on the Response of CuFeTe2 Ceramics to Oxygen Gas

被引：0
|
作者：
Kozaki, Masatoshi [1 ]
Tokunaga, Yuta [1 ]
Huang, Yezhi [1 ]
Kuriyaki, Hisao [1 ]
Toko, Kiyoshi [1 ]
机构：
[1] Kyushu Univ, Grad Sch Informat Elect Engn, Nishi Ku, 744 Motooka, Fukuoka 8190395, Japan
来源：
SENSORS AND MATERIALS | 2016年 / 28卷 / 03期
关键词：
oxygen gas sensor; intercalation; layered material; COMPOUND CUFETE2; THIN-FILMS;
D O I：
暂无
中图分类号：
TH7 [仪器、仪表];
学科分类号：
0804 ; 080401 ; 081102 ;
摘要：
A new oxygen sensor based on the resistance change caused by oxygen intercalation in the layered compound CuFeTe2 (CFT) was developed. When intercalation occurs, oxygen molecules penetrate into the CFT interlayer, stretching the van der Waals gap and increasing the c -axis resistance. In this study, we prepared ceramic samples from a single crystal using different sintering temperatures. Results show that the sample sintered at 100 degrees C showed the highest oxygen gas response. Moreover we carried out the surface observation of the cross section of each CFT ceramic sample and found that the porosity of the sample increased with decreasing sintering temperature.
引用
收藏
页码：231 / 236
页数：6
相关论文
共 45 条
  • [31] High-Response Room-Temperature NO2 Sensor and Ultrafast Humidity Sensor Based on SnO2 with Rich Oxygen Vacancy
    Zhong, Yujia
    Li, WeiWei
    Zhao, Xuanliang
    Jiang, Xin
    Lin, Shuyuan
    Zhen, Zhen
    Chen, Wenduo
    Xie, Dan
    Zhu, Hongwei
    ACS APPLIED MATERIALS & INTERFACES, 2019, 11 (14) : 13441 - 13449
  • [32] Investigation of low temperature effects on work function based CO2 gas sensing of nanoparticulate CuO films
    Tanvir, N. B.
    Yurchenko, O.
    Laubender, E.
    Urban, G.
    SENSORS AND ACTUATORS B-CHEMICAL, 2017, 247 : 968 - 974
  • [33] Controlling Work Function and Damaging Effects of Sputtered RuO2 Gate Electrodes by Changing Oxygen Gas Ratio during Sputtering
    Kim, Hyo Kyeom
    Yu, Il-Hyuk
    Lee, Jae Ho
    Park, Tae Joo
    Hwang, Cheol Seong
    ACS APPLIED MATERIALS & INTERFACES, 2013, 5 (04) : 1327 - 1332
  • [34] Highly Sensitive, Temperature-Independent Oxygen Gas Sensor Based on Anatase TiO2 Nanoparticle Grafted, 2D Mixed Valent VOx Nanoflakelets
    Raghu, Appu Vengattoor
    Karuppanan, Karthikeyan K.
    Pullithadathil, Biji
    ACS SENSORS, 2018, 3 (09): : 1811 - 1821
  • [35] Examining the effects of sintering temperature on double perovskite La2 NiTiO6 : Analysis of structural, optical, electrical properties, and leakage current characteristics
    Malik, Sujan
    Dutta, Abhigyan
    JOURNAL OF PHYSICS AND CHEMISTRY OF SOLIDS, 2024, 190
  • [36] Grain Size Effects in Sensor Response of Nanostructured SnO2-and In2O3-Based Conductometric Thin Film Gas Sensor
    Korotcenkov, G.
    Han, S-D.
    Cho, B. K.
    Brinzari, V.
    CRITICAL REVIEWS IN SOLID STATE AND MATERIALS SCIENCES, 2009, 34 (1-2) : 1 - 17
  • [37] Structural inheritance and change from ZnSn(OH)6 to ZnSnO3 compounds used for ethanol sensors: Effects of oxygen vacancies, temperature and UV on gas-sensing properties
    Wang, Xiuyu
    Zhu, Xuantong
    Tao, Tao
    Leng, Binxin
    Xu, Wen
    Mao, Luhong
    JOURNAL OF ALLOYS AND COMPOUNDS, 2020, 829
  • [38] Enhancement in multiferroic and piezoelectric properties of BiFeO3-BaTiO3-Bi0.5Na0.5TiO3 lead-free ceramics with MnO2 addition by optimizing sintering temperature and dwell time
    Li, Ying
    Guo, Yongquan
    Zheng, Qiaoji
    Lam, Kwok Ho
    Zhou, Wei
    Wan, Yang
    Lin, Dunmin
    MATERIALS RESEARCH BULLETIN, 2015, 68 : 92 - 99
  • [39] Effects of substrate temperature and ambient oxygen pressure on growth of Ba(Fe1/2Nb1/2)O3 thin films by pulsed laser deposition
    ZHANG Wei
    WU ShuYa
    CHEN XiangMing
    Science Bulletin, 2013, (27) : 3398 - 3402
  • [40] Effects of substrate temperature and ambient oxygen pressure on growth of Ba(Fe1/2Nb1/2)O3 thin films by pulsed laser deposition
    Zhang Wei
    Wu ShuYa
    Chen XiangMing
    CHINESE SCIENCE BULLETIN, 2013, 58 (27): : 3398 - 3402
12345