Effects of Sintering Temperature on the Response of CuFeTe2 Ceramics to Oxygen Gas

被引：0

作者：

Kozaki, Masatoshi ^{[1
]}

Tokunaga, Yuta ^{[1
]}

Huang, Yezhi ^{[1
]}

Kuriyaki, Hisao ^{[1
]}

Toko, Kiyoshi ^{[1
]}

机构：

[1] Kyushu Univ, Grad Sch Informat Elect Engn, Nishi Ku, 744 Motooka, Fukuoka 8190395, Japan

来源：

SENSORS AND MATERIALS | 2016年 / 28卷 / 03期

关键词：

oxygen gas sensor; intercalation; layered material; COMPOUND CUFETE2; THIN-FILMS;

D O I：

暂无

中图分类号：

TH7 [仪器、仪表];

学科分类号：

0804 ; 080401 ; 081102 ;

摘要：

A new oxygen sensor based on the resistance change caused by oxygen intercalation in the layered compound CuFeTe2 (CFT) was developed. When intercalation occurs, oxygen molecules penetrate into the CFT interlayer, stretching the van der Waals gap and increasing the c -axis resistance. In this study, we prepared ceramic samples from a single crystal using different sintering temperatures. Results show that the sample sintered at 100 degrees C showed the highest oxygen gas response. Moreover we carried out the surface observation of the cross section of each CFT ceramic sample and found that the porosity of the sample increased with decreasing sintering temperature.

引用

页码：231 / 236

页数：6

共 45 条

[1] OXYGEN GAS RESPONSE OF LAYERED COMPOUND CUFETE2
KURIYAKI, H
KISHIRO, K
HIRAKAWA, K
JAPANESE JOURNAL OF APPLIED PHYSICS PART 1-REGULAR PAPERS SHORT NOTES & REVIEW PAPERS, 1990, 29 (08): : 1604 - 1607
[2] GRAIN-SIZE EFFECT OF CUFETE2 RESPONSE TO OXYGEN
KISHIRO, K
KURIYAKI, H
HIRAKAWA, K
JAPANESE JOURNAL OF APPLIED PHYSICS PART 2-LETTERS, 1993, 32 (5A): : L674 - L675
[3] Development of New Oxygen Sensor by Microfabrication of Single-Crystal CuFeTe2 Thin Films
Kozaki, Masatoshi
Higuchi, Yuichiro
Ikeda, Akihiro
Kuriyaki, Hisao
Toko, Kiyoshi
SENSORS AND MATERIALS, 2013, 25 (07) : 471 - 477
[4] Effects of sintering temperature on the electric properties of Mn-modified BiFeO3-BaTiO3 bulk ceramics
Kim, D. J.
Lee, M. H.
Park, J. S.
Kim, M-H.
Song, T. K.
Kim, W. -J.
Jang, K. W.
Kim, S. S.
Do, D.
JOURNAL OF THE KOREAN PHYSICAL SOCIETY, 2015, 66 (07) : 1115 - 1119
[5] Effect of Sintering Temperature on Properties of Sr2Bi5FeTi5O21 Ferroelectric Ceramics
Guo Xiaodong
Zhang Fengqing
Wang Cuijuan
Xie Xiaobin
Fan Suhua
RARE METAL MATERIALS AND ENGINEERING, 2015, 44 : 9 - 12
[6] Effects of sintering temperature and duration on the structural and electrical properties of CuBiS2 bulks
Wubet, Walelign
Kuo, Dong-Hau
Abdullah, Hairus
JOURNAL OF SOLID STATE CHEMISTRY, 2015, 230 : 237 - 242
[7] Towards fluoride-based oxygen gas sensors operating at room temperature: Effects of the whisker materials incorporated in the sensing electrode on response time
Eguchi, T
Amasaki, H
Suzuki, T
Kuwano, J
Saito, Y
ANALYTICAL SCIENCES, 1997, 13 : 295 - 298
[8] Effects of sintering temperature on the properties of Mn/Y codoped Ba0.67Sr0.33TiO3 ceramics for tunable application
Qiang, Hua
Xu, Zunping
JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS, 2015, 26 (11) : 9063 - 9066
[9] UV-activated room temperature oxygen gas sensor based on TiO2-decorated bridging GaN nanowires
Li, Zhirui
Huang, Hui
Zhao, Danna
Chen, Shunji
Cai, Weicheng
Tang, Tianlin
SENSORS AND ACTUATORS B-CHEMICAL, 2024, 401
[10] Enhanced room-temperature MR and TCR in polycrystalline La0.67(Ca0.33-xSrx)MnO3 ceramics by oxygen assisted sintering
Sun, Tao
Zhao, Shuang
Ji, Fuquan
Liu, Xiang
CERAMICS INTERNATIONAL, 2018, 44 (02) : 2400 - 2406

← 1 2 3 4 5 →