Modification of Silicon Carbide Surfaces by Atmospheric Pressure Plasma for Composite Applications

被引：9

作者：

Rodriguez-Santiago, Victor ^{[1
]}

Vargas-Gonzalez, Lionel ^{[1
]}

Bujanda, Andres A. ^{[1
]}

Baeza, Jose A. ^{[1
]}

Fleischman, Michelle S. ^{[1
]}

Yim, Jacqueline H. ^{[1
]}

Pappas, Daphne D. ^{[1
]}

机构：

[1] USA, Res Lab, Aberdeen Proving Ground, MD 21005 USA

来源：

ACS APPLIED MATERIALS & INTERFACES | 2013年 / 5卷 / 11期

关键词：

silicon carbide; dielectric barrier discharges; bonding; surface modification; grit blasting; POLYMERS; ALUMINA; EPOXY;

D O I：

10.1021/am303227q

中图分类号：

TB3 [工程材料学];

学科分类号：

0805 ; 080502 ;

摘要：

In this study, we explore the use of atmospheric pressure plasmas for enhancing the adhesion of SiC surfaces using a urethane adhesive, as an alternative to grit blasting Surface analysis showed that He-O-2 plasma treatments resulted in a hydrophilic Surface mostly by producing SiOx. Four point bending tests and bonding pull tests were carried out on control, grit-blasted, and plasma-treated surfaces. Grit-blasted samples showed enhanced bonding but also a decrease in flexural strength. Plasma treated samples did not affect the flexural strength of the material and showed an increase in bonding strength. These results suggest that atmospheric pressure plasma treatment of ceramic materials, is an effective alternative to grit blasting for adhesion enhancement.

引用

页码：4725 / 4730

页数：6

共 26 条

[11] Chemical and morphological modification of polymers under a helium-oxygen dielectric barrier discharge
Pappas, D. Daphne
Bujanda, Andres A.
Orlicki, Joshua A.
Jensen, Robert E.
[J]. SURFACE & COATINGS TECHNOLOGY, 2008, 203 (5-7) : 830 - 834
[12] High-temperature effects in the fracture mechanical behaviour of silicon carbide liquid-phase sintered with AlN-Y2O3 additives
Rixecker, G
Wiedmann, I
Rosinus, A
Aldinger, F
[J]. JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 2001, 21 (08) : 1013 - 1019
[13] Atmospheric Plasma Processing of Polymers in Helium-Water Vapor Dielectric Barrier Discharges
Rodriguez-Santiago, Victor
Bujanda, Andres A.
Stein, Benjamin E.
Pappas, Daphne D.
[J]. PLASMA PROCESSES AND POLYMERS, 2011, 8 (07) : 631 - 639
[14] Surface modification of polymer surfaces: atmospheric plasma versus vacuum plasma treatments
Shenton, MJ
Stevens, GC
[J]. JOURNAL OF PHYSICS D-APPLIED PHYSICS, 2001, 34 (18) : 2761 - 2768
[15] SURFACE CLEANING WITH THE CARBON-DIOXIDE SNOW JET
SHERMAN, R
HIRT, D
VANE, R
[J]. JOURNAL OF VACUUM SCIENCE & TECHNOLOGY A-VACUUM SURFACES AND FILMS, 1994, 12 (04): : 1876 - 1881
[16] XPS characterization of gel-derived silicon oxycarbide glasses
Soraru, GD
DAndrea, G
Glisenti, A
[J]. MATERIALS LETTERS, 1996, 27 (1-2) : 1 - 5
[17] Use of silane coupling agents to enhance the performance of adhesively bonded alumina to resin hybrid composites
Tanoglu, M
McKnight, SH
Palmese, GR
Gillespie, JW
[J]. INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES, 1998, 18 (06) : 431 - 434
[18] Atmospheric pressure plasmas: A review
Tendero, C
Tixier, C
Tristant, P
Desmaison, J
Leprince, P
[J]. SPECTROCHIMICA ACTA PART B-ATOMIC SPECTROSCOPY, 2006, 61 (01) : 2 - 30
[19] Flexural Strength, Fracture Toughness, and Hardness of Silicon Carbide and Boron Carbide Armor Ceramics
Vargas-Gonzalez, Lionel
Speyer, Robert F.
Campbell, James
[J]. INTERNATIONAL JOURNAL OF APPLIED CERAMIC TECHNOLOGY, 2010, 7 (05) : 643 - 651
[20] Control of the interfacial properties of ultrahigh-molecular-weight polyethylene/magnesium hybrid composites through use of atmospheric plasma treatment
Vargas-Gonzalez, Lionel R.
Walsh, Shawn M.
Pappas, Daphne D.
[J]. POLYMER COMPOSITES, 2012, 33 (02) : 207 - 214

← 1 2 3 →