Slow and rapid cooling of Al-Cu-Si ultrafine eutectic composites: Interplay of cooling rate and microstructure in mechanical properties

被引：15

作者：

de Gouveia, Guilherme Lisboa ^{[1
]}

Kakitani, Rafael ^{[2
]}

Gomes, Leonardo Fernandes ^{[1
]}

Moreira Afonso, Conrado Ramos ^{[1
]}

Cheung, Noe ^{[2
]}

Spinelli, Jose Eduardo ^{[1
]}

机构：

[1] Univ Fed Sao Carlos, Dept Mat Engn, BR-13565905 Sao Carlos, SP, Brazil

[2] Univ Estadual Campinas, UNICAMP, Dept Mfg & Mat Engn, BR-13083860 Campinas, SP, Brazil

来源：

JOURNAL OF MATERIALS RESEARCH | 2019年 / 34卷 / 08期

基金：

巴西圣保罗研究基金会;

关键词：

rapid solidification; microstructure; strength; HIGH-STRENGTH; TENSILE PROPERTIES; SOLIDIFICATION; ALLOYS; ALUMINUM; NANOCRYSTALLINE; DUCTILITY;

D O I：

10.1557/jmr.2018.495

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

Ternary Al-15 wt% Cu-7 wt% Si and Al-22 wt% Cu-7 wt% Si alloy specimens were generated by transient directional solidification (DS) and rapid solidification (RS) techniques. The microstructures are constituted by an alpha-Al dendritic matrix surrounded by two eutectic, that is, a binary eutectic (Si + alpha-Al) and a bimodal eutectic, consisting of cellular-type binary eutectic colonies (alpha-Al + Al2Cu) in a ternary eutectic matrix consisting of alpha-Al + Al2Cu + Si. The bimodal eutectic exists at cooling rates from 0.5 to 250 K/s. The secondary dendritic spacing, lambda(2), of the DS samples varied from 5 to 20 mu m and from 10 to 18 mu m for both examined alloys. The lambda(2) from 2.7 to 4.0 mu m characterized the RS samples. Mechanical properties have been determined for various samples related to different dendritic spacing values. Based on the evaluation of the rapidly solidified microstructures, it was possible to assess the cooling rates.

引用

页码：1381 / 1394

页数：14

共 36 条

[31] Effects of Solidification Thermal Parameters on Microstructure and Mechanical Properties of Sn-Bi Solder Alloys [J].

Silva, Bismarck Luiz ;

Evangelista da Silva, Vitor Covre ;

Garcia, Amauri ;

Spinelli, Jose Eduardo .

JOURNAL OF ELECTRONIC MATERIALS, 2017, 46 (03) :1754-1769

[32] Feeding and Distribution of Porosity in Cast Al-Si Alloys as Function of Alloy Composition and Modification [J].

Tiedje, Niels Skat ;

Taylor, John A. ;

Easton, Mark A. .

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2012, 43A (12) :4846-4858

[33]

Tiller W A, 1958, LIQUID METALS SOLIDI, P276

[34] Interconnection of Zn content, macrosegregation, dendritic growth, nature of intermetallics and hardness in directionally solidified Mg-Zn alloys [J].

Verissimo, Nathalia C. ;

Brito, Crystopher ;

Santos, Washington L. R. ;

Cheung, Noe ;

Spinelli, Jose E. ;

Garcia, Amauri .

JOURNAL OF ALLOYS AND COMPOUNDS, 2016, 662 :1-10

[35] High tensile ductility in a nanostructured metal [J].

Wang, YM ;

Chen, MW ;

Zhou, FH ;

Ma, E .

NATURE, 2002, 419 (6910) :912-915

[36] Eutectic spacing and faults of directionally solidified Al-Al3Ni eutectic [J].

Zhuang, Y. X. ;

Zhang, X. M. ;

Zhu, L. H. ;

Hu, Z. Q. .

SCIENCE AND TECHNOLOGY OF ADVANCED MATERIALS, 2001, 2 (01) :37-39

← 1 2 3 4 →