Synthesis and properties of high tap-density cathode material for lithium ion battery by the eutectic molten-salt method

被引：21

作者：

Chang, Zhaorong ^{[1
]}

Chen, Zhongjun ^{[1
]}

Wu, Feng ^{[2
]}

Tang, Hongwei ^{[1
]}

Zhu, Zhihong ^{[1
]}

Yuan, Xiao Zi ^{[3
]}

Wang, Haijiang ^{[3
]}

机构：

[1] Henan Normal Univ, Coll Chem & Environm Sci, Xinxiang 453007, Peoples R China

[2] Beijing Inst Technol, Coll Chem Engn & Environm, Beijing 100080, Peoples R China

[3] Natl Res Council Canada, Inst Fuel Cell Innovat, Vancouver, BC V6T 1W5, Canada

来源：

SOLID STATE IONICS | 2008年 / 179卷 / 39期

关键词：

Li(Ni1/3CO1/3Mn1/3)O-2; Eutectic molten Salt; Cathode material;

D O I：

10.1016/j.ssi.2008.08.011

中图分类号：

O64 [物理化学（理论化学）、化学物理学];

学科分类号：

070304 ; 081704 ;

摘要：

Spherical Li(Ni1/3CO1/3Mn1/3)O-2 with a layered structure has been successfully prepared by the eutectic molten-salt method using 0.24LiCO(3)-0.76LiOH (with a melting point of 423 degrees C) and (Ni1/3Co1/3Mn1/3)(OH)(2), where the ratio of Li/(Ni+Co+Mn) is controlled at 1:1. The tap-density of the powders obtained in this work (2.89) is remarkably higher than that of spherical Li(Ni1/3Co1/3Mn1/3)O-2 powders synthesized by other single lithium salts (2.40). XRD analysis shows that this material has a well-developed layered structure. Charge-discharge tests have shown that a Li(Ni1/3Co1/3Mn1/3)O-2 cathode prepared at 950 degrees C has an initial discharge capacity as high as 166. After 50 cycles, the cell showed little capacity loss, which indicated the excellent cyclic performance of the synthesized materials. (C) 2008 Elsevier B.V. All rights reserved.

引用

页码：2274 / 2277

页数：4

共 27 条

[1] Comparison of the electrochemical behaviors of stoichiometric LiNi1/3Co1/3Mn1/3O2 and lithium excess Li1.03(Ni1/3Co1/3Mn1/3)0.97O2 [J].

Choi, J ;

Manthiram, A .

ELECTROCHEMICAL AND SOLID STATE LETTERS, 2004, 7 (10) :A365-A368

[2] Effect of titanium substitution in layered LiNiO2 cathode material prepared by molten-salt synthesis [J].

Ha, Hyung-Wook ;

Jeong, Kyung Hee ;

Kim, Keon .

JOURNAL OF POWER SOURCES, 2006, 161 (01) :606-611

[3] Synthesis and electrochemical properties of lithium cobalt oxides prepared by molten-salt synthesis using the eutectic mixture of LiCl-Li2CO3 [J].

Han, CH ;

Hong, YS ;

Park, CM ;

Kim, K .

JOURNAL OF POWER SOURCES, 2001, 92 (1-2) :95-101

[4] Cyclic performances of HT-LiCo0.8M0.2O2 (M=Al, Ni) powders prepared by the molten salt synthesis method [J].

Han, CH ;

Hong, YS ;

Kim, K .

SOLID STATE IONICS, 2003, 159 (3-4) :241-247

[5] Synthesis of LiNi1/3Co1/3Mn1/3O2-zFz, cathode material from oxalate precursors for lithium ion battery [J].

He, Yu-Shi ;

Pei, Li ;

Liao, Xiao-Zhen ;

Ma, Zi-Feng .

JOURNAL OF FLUORINE CHEMISTRY, 2007, 128 (02) :139-143

[6] Synthesis and characterization of submicron-sized LiNi1/3Co1/3Mn1/3O2 by a simple self-propagating solid-state metathesis method [J].

He, Yu-Shi ;

Ma, Zi-Feng ;

Liao, Xiao-Zhen ;

Jiang, Yi .

JOURNAL OF POWER SOURCES, 2007, 163 (02) :1053-1058

[7] Synthesis and improved electrochemical performance of Al (OH)3-coated Li[Ni1/3Mn1/3Co1/3]O2 cathode materials at elevated temperature [J].

Jang, SB ;

Kang, SH ;

Amine, K ;

Bae, YC ;

Sun, YK .

ELECTROCHIMICA ACTA, 2005, 50 (20) :4168-4173

[8] A study on electrochemical characteristics of LiCoO2/LiNi1/3Mn1/3Co1/3O2 mixed cathode for Li secondary battery [J].

Kim, Hyun-Soo ;

Kim, Sung-Il ;

Kim, Woo-Seong .

ELECTROCHIMICA ACTA, 2006, 52 (04) :1457-1461

[9] Molten salt synthesis of LiNi0.5Mn1.5O4 spinel for 5 V class cathode material of Li-ion secondary battery [J].

Kim, JH ;

Myung, ST ;

Sun, YK .

ELECTROCHIMICA ACTA, 2004, 49 (02) :219-227

[10] Effect of synthesis method on the electrochemical performance of LiNi1/3Mn1/3Co1/3O2 [J].

Li, DC ;

Muta, T ;

Zhang, LQ ;

Yoshio, M ;

Noguchi, H .

JOURNAL OF POWER SOURCES, 2004, 132 (1-2) :150-155

← 1 2 3 →