Aerosol-Assisted Atmospheric Pressure Cold Plasma Deposition of Organic-Inorganic Nanocomposite Coatings

被引：55

作者：

Fanelli, Fiorenza ^{[1
]}

Fracassi, Francesco ^{[1
,2
]}

机构：

[1] Univ Bari Aldo Moro, Dept Chem, CNR, Inst Inorgan Methodol & Plasmas IMIP, I-70126 Bari, Italy

[2] Univ Bari Aldo Moro, Dept Chem, I-70126 Bari, Italy

来源：

PLASMA CHEMISTRY AND PLASMA PROCESSING | 2014年 / 34卷 / 03期

关键词：

Organic-inorganic nanocomposite; Thin film; Atmospheric pressure cold plasmas; Aerosol; Nanoparticle; CHEMICAL-VAPOR-DEPOSITION; THIN-FILMS; SILVER NANOPARTICLES; GLOW-DISCHARGE; POLYMERIZATION; PRECURSORS; POLYMERS; TECHNOLOGY; SURFACES; ROUTE;

D O I：

10.1007/s11090-013-9518-9

中图分类号：

TQ [化学工业];

学科分类号：

0817 ;

摘要：

Low pressure plasma technologies have been widely and successfully utilized for the production of a large variety of organic-inorganic nanocomposite (NC) thin films consisting of metal or metal oxide nanoparticles embedded in a polymer matrix. Recently, the deposition of this class of coatings has been also accomplished by atmospheric pressure cold plasmas using aerosol-assisted processes in which a dispersion containing preformed inorganic nanoparticles and the liquid precursor of the polymeric component is atomized and injected in aerosol form in the atmospheric plasma. This short review is aimed at presenting this approach which is expected to enlarge the range of structures and properties of organic-inorganic NC coatings deposited by cold plasma technologies.

引用

页码：473 / 487

页数：15

共 64 条

[1] Dispersion of Cerium-Based Nanoparticles in an Organosilicon Plasma Polymerized Coating: Effect on Corrosion Protection [J].