KINETICS AND MECHANISM OF SPHALERITE LEACHING BY SODIUM NITRATE IN SULPHURIC ACID SOLUTION

被引:27
|
作者
Sokic, M. [1 ]
Markovic, B. [1 ]
Matkovic, V. [1 ]
Zivkovic, D. [2 ]
Strbac, N. [2 ]
Stojanovic, J. [1 ]
机构
[1] Inst Technol Nucl & Other Mineral Raw Mat, Belgrade, Serbia
[2] Univ Belgrade, Tech Fac Bor, Bor, Serbia
关键词
sphalerite leaching; sodium nitrate; sulphuric acid; kinetics; mechanism; FERRIC SULFATE; DISSOLUTION KINETICS; CONCENTRATE; ZINC; CHALCOPYRITE; PASSIVATION; BEHAVIOR; SULFIDE; IRON;
D O I
10.2298/JMMB111130022S
中图分类号
TF [冶金工业];
学科分类号
0806 ;
摘要
Interest for application of hydrometallurgical processes in a processing of complex sulphide ores and concentrates has increased in recent years. Their application provides better metal recoveries and reduced emission of gaseous and toxic ageneses in the environment. The kinetics and mechanism of sphalerite leaching from complex sulphide concentrate with sulphuric acid and sodium nitrate solution at standard conditions was presented in this paper. The influences of temperature and time on the leaching degree of zinc were investigated and kinetic analysis of the process was accomplished. With temperature increasing from 60 to 90 degrees C, the zinc leaching increased from 25.23% to 71.66% after 2 hours, i.e. from 59.40% to 99.83% after 4 hours. The selected kinetic model indicated that the diffusion through the product layer was the rate-controlling step during the sphalerite leaching. The activation energy was determined to be 55 kJ/mol in the temperature range 60-90 degrees C. XRD, light microscopy and SEM/EDX analyses of the complex concentrate and leach residue confirmed formation of elemental sulphur and diffusion-controlled leaching mechanism.
引用
收藏
页码:185 / 195
页数:11
相关论文
共 50 条
  • [11] Kinetics of sulphuric acid leaching of a zinc silicate calcine
    Souza, A. D.
    Pina, P. S.
    Lima, E. Vo.
    Da Silva, C. A.
    Leao, V. A.
    HYDROMETALLURGY, 2007, 89 (3-4) : 337 - 345
  • [12] Leaching kinetics of nickel extraction from hazardous waste by sulphuric acid and optimization dissolution conditions
    Gharabaghi, Mahdi
    Irannajad, Mehdi
    Azadmehr, Amir Reza
    CHEMICAL ENGINEERING RESEARCH & DESIGN, 2013, 91 (02) : 325 - 331
  • [13] Direct Acid Leaching of Sphalerite: An Approach Comparative and Kinetics Analysis
    Picazo-Rodriguez, Nallely G.
    de Jesus Soria-Aguilar, Ma.
    Martinez-Luevanos, Antonia
    Almaguer-Guzman, Isaias
    Chaidez-Felix, Josue
    Raul Carrillo-Pedroza, Francisco
    MINERALS, 2020, 10 (04)
  • [14] Kinetics of sphalerite dissolution by sodium chlorate in hydrochloric acid
    Ucar, Goekhan
    HYDROMETALLURGY, 2009, 95 (1-2) : 39 - 43
  • [15] INVESTIGATION OF THE KINETICS OF SULPHURIC ACID LEACHING OF ZINC FROM CALAMINE
    Ramazanova, R. A.
    Samoilov, V., I
    Seraya, N., V
    Daumova, G. K.
    Azbanbayev, E. M.
    Aubakirova, R. A.
    METALURGIJA, 2021, 60 (1-2): : 113 - 116
  • [16] Caliche and Seawater, Sources of Nitrate and Chloride Ions to Chalcopyrite Leaching in Acid Media
    Hernandez, Pia
    Gahona, Giovanni
    Martinez, Monserrat
    Toro, Norman
    Castillo, Jonathan
    METALS, 2020, 10 (04)
  • [17] A comparison of the kinetics and mechanism of acid leaching of sphalerite containing low and high concentrations of iron
    Weisener, CG
    Smart, RSC
    Gerson, AR
    INTERNATIONAL JOURNAL OF MINERAL PROCESSING, 2004, 74 (1-4) : 239 - 249
  • [18] The Effects of Sulphuric Acid and Sodium Chloride Agglomeration and Curing on Chalcopyrite Leaching
    Quezada, Victor
    Roca, Antoni
    Benavente, Oscar
    Cruells, Montserrat
    Melo, Evelyn
    METALS, 2021, 11 (06)
  • [19] Leaching kinetics of spent nickel-cadmium battery in sulphuric acid
    Randhawa, Navneet Singh
    Gharami, Kalpataru
    Kumar, Manoj
    HYDROMETALLURGY, 2016, 165 : 191 - 198
  • [20] Studies on the leaching kinetics of cobalt from spent catalyst with sulphuric acid
    Deng, C.
    Feng, Q.
    Chen, Y.
    TRANSACTIONS OF THE INSTITUTIONS OF MINING AND METALLURGY SECTION C-MINERAL PROCESSING AND EXTRACTIVE METALLURGY, 2007, 116 (03): : 159 - 162