Modelling of the flow behaviour of wrought aluminium alloys at elevated temperatures by a new constitutive equation

The hot working behaviour of an Al-0.7%Mg-0.4%Si (wt.%) aluminium alloy has been investigated by torsion testing in the 450-575 degrees C temperature range. The behaviour of the alloy, in terms of equivalent stress vs equivalent strain, was modelled by a modified form of the Hensel and Spittel constitutive equation. In this new equation, the applied stress sigma was replaced by the sinh(alpha sigma) term, where alpha was a constant. The revised form of the Hensel-Spittel equation gave an excellent description of the flow curves and of the decrease in the strain rate sensitivity of the flow stress observed, at a given strain, with increasing strain rate. The model equation was then rewritten to explicitly include the Arrhenius term describing the temperature dependence of strain rate. The calculation indicated that the activation energy for hot working decreased from 218 to 198 kJ mol (1) in the considered range of strain.(C) 2013 Elsevier Ltd. All rights reserved.