Effect of various niobium additions on microstructure and mechanical behavior of a NiAl-Cr-Mo eutectic alloy

被引：0
作者：
Huai, KW
Guo, JT
Gao, Q
Yang, R
机构：
[1] Chinese Acad Sci, Superalloys Div, Inst Met Res, Shenyang 110016, Peoples R China
[2] Dalian Univ Technol, Dept Mat Engn, Dalian 116024, Peoples R China
来源：
ZEITSCHRIFT FUR METALLKUNDE | 2006年 / 97卷 / 01期
关键词：
NiAl-28Cr-6Mo; Nb(Cr1-x-yNixAly)(2) phase; microstructure; mechanical properties;
D O I：
暂无
中图分类号：
TF [冶金工业];
学科分类号：
0806 ;
摘要：
The microstructure and compressive behavior of the NiAl-28Cr-6Mo alloy doped with various amounts of Nb have been investigated. The results show that the microstructure of all Nb-doped alloys mainly consists of three phases, viz. the gray lamellar Cr(Mo) plate, the black NiAl matrix, and Cr2Nb with C14-structure-type 1 Laves phase semicontinuously distributed at the cell boundary. All Nb-doped alloys exhibit relatively good room-temperature compressive ductility and higher yield strength at all temperatures compared to the NiAl-28Cr-6Mo eutectic alloy due to the presence of Laves phase. It is found that the NiAl-28Cr-6Mo alloy doped with 1 at.% Nb attains the optimum concerning high temperature strength and room temperature ductility.
引用
收藏
页码：59 / 63
页数：5
相关论文
共 50 条
  • [1] Effect of various niobium additions on microstructure and mechanical behavior of a NiAl-Cr-Mo eutectic alloy
    Huai, Kaiwen
    Guo, Jianting
    Gao, Qiang
    Yang, Rui
    [J]. International Journal of Materials Research, 2022, 97 (01): : 59 - 63
  • [2] Effect of nb on the microstructure and mechanical properties of cast NiAl-Cr(Mo) eutectic alloy
    Huai, KW
    Guo, JT
    Ren, ZR
    Gao, Q
    Yang, R
    [J]. JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY, 2006, 22 (02) : 164 - 168
  • [3] Effect of Nb on the Microstructure and Mechanical Properties of Cast NiAl-Cr(Mo) Eutectic Alloy
    Kaiwen HUAI
    [J]. Journal of Materials Science & Technology, 2006, (02) : 164 - 168
  • [4] Microstructure and mechanical properties of NiAl(Ti)-Cr(Mo) eutectic alloy
    Xiao Xuan
    Guo Jianting
    Yu Haipeng
    [J]. ACTA METALLURGICA SINICA, 2006, 42 (10) : 1031 - 1035
  • [5] Influence of Ho and Hf on the microstructure and mechanical properties of NiAl and NiAl-Cr(Mo) eutectic alloy
    Zheng, L.
    Sheng, L. Y.
    Qiao, Y. X.
    Yang, Y.
    Lai, C.
    [J]. MATERIALS RESEARCH EXPRESS, 2019, 6 (04):
  • [6] Effect of Zr addition on microstructure and mechanical properties of NiAl/Cr(Mo) base eutectic alloy
    Shenzhen Key Laboratory of Human Tissue Regeneration and Repair, Shenzhen Institute, Peking University, Shenzhen
    518057, China
    不详
    110016, China
    [J]. Jinshu Xuebao, 7 (828-834): : 828 - 834
  • [7] EFFECT OF Zr ADDITION ON MICROSTRUCTURE AND MECHANICAL PROPERTIES OF NiAl/Cr(Mo) BASE EUTECTIC ALLOY
    Sheng Liyuan
    Guo Jianting
    Lai Chen
    Xi Tingfei
    [J]. ACTA METALLURGICA SINICA, 2015, 51 (07) : 828 - 834
  • [8] Effect of solidification rate on microstructure and mechanical properties of an eutectic NiAl-Cr(Mo)-Hf alloy
    Guo, JT
    Xu, CM
    Du, XH
    Fu, HZ
    [J]. MATERIALS LETTERS, 2004, 58 (26) : 3233 - 3236
  • [9] Mechanical behaviors of NiAl-Cr(Mo)-based near eutectic alloy with Ti, Hf, Nb and W additions
    Tang Lin-zhi
    Zhang Zhi-gang
    Li Shu-suo
    Gong Sheng-kai
    [J]. TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, 2010, 20 (02) : 212 - 216
  • [10] Microstructure and mechanical properties of rapidly solidified NiAl-Cr(Mo) eutectic alloy doped with trace Dy
    Sheng, L. Y.
    Guo, J. T.
    Tian, Y. X.
    Zhou, L. Z.
    Ye, H. Q.
    [J]. JOURNAL OF ALLOYS AND COMPOUNDS, 2009, 475 (1-2) : 730 - 734
12345