Strength and stiffness of timber joints with very high strength steel dowels

Tests on double-shear timber-to-timber joints and double-shear timber joints with slotted-in steel plates loaded parallel-to-grain were undertaken. The used species were spruce, beech, cumaru and azobe (ekki) with one, three and five dowels in a row. Two different steel qualities were used, high strength steel (hss) and very high strength steel (vhss) dowels. The experimental results have shown that the load carrying capacity of joints with vhss dowels is higher than for joints using hss dowels whilst still providing enough plastic deformation capacity to allow for ductile failure modes. No correlation between load carrying capacity and density within one wood species could be observed. The observed effective number of fasteners is lower for the joints with vhss dowels and depends also on the used wood species and the slenderness of dowels. Also for the stiffness K-ser, an effective number of fasteners for the joints with more than one dowel in a row could be observed. The well-established Johansen model can be used to design these types of joints. (C) 2016 Elsevier Ltd. All rights reserved.