Microstructure and mechanical properties of Nbss/Nb5Si3 in-situ composites alloyed with Mo and W

被引：2

作者：

Tanaka, H ^{[1
]}

Kim, WY

Kasama, A

Tanaka, R

Mishima, Y

机构：

[1] Japan Ultra High Temp Mat Res Inst, Ube, Yamaguchi 7550001, Japan

[2] Tokyo Inst Technol, Dept Mat Sci & Engn, Yokohama, Kanagawa 2268502, Japan

来源：

JOURNAL OF THE JAPAN INSTITUTE OF METALS | 2002年 / 66卷 / 03期

关键词：

niobium alloys; multi-phase alloy; microstructure; directional solidification; room temperature fracture toughness; high temperature strengths; in-situ composite;

D O I：

10.2320/jinstmet1952.66.3_182

中图分类号：

TF [冶金工业];

学科分类号：

0806 ;

摘要：

The mechanical properties of Nb-ss/Nb5Si3 in-situ composite., alloyed with Mo and W have been studied in relation to the microstructure, The samples were prepared by arc-melting, or floating zone melting method to produce a directional structure. Microstructures were characterized by XRD, EPMA and BEL Room temperature fracture toughness and high temperature strength were examined by three point bending test and compression test, respectively. In Nb-5Mo-xW-16Si and Nb-5Mo-xW-20Si( x = 0 similar to 15 mol%) alloy series, the strength increased and fracture toughness decreased monotonously with increasing content of W. Furthermore, the strength of Nb-15Mo-18Si produced by directional solidification was slightly higher than arc-melted samples, but the fracture toughness was extremely low, It is Suggested that intrinsic toughness of Nb-ss, and thickness of Nb-ss-phase in the microstructures are very important to room temperature fracture toughness.

引用

页码：182 / 187

页数：6

共 50 条

[11] RETRACTED: Microstructures and mechanical properties of Nb/Nb5Si3 composites alloyed with W, Mo and W-Mo fabricated by spark plasma sintering (Retracted Article)
Xiong, Bowen
Cai, Changchun
Wang, Zhenjun
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2014, 606 : 68 - 73
[12] Microstructures of Nb/Nb5Si3 composites and it alloyed with W, Mo and W-Mo fabricated by spark plasma sintering
Xiong, Bowen
Cai, Changchun
Wang, Zhenjun
JOURNAL OF ALLOYS AND COMPOUNDS, 2014, 583 : 574 - 577
[13] Synthesis of Nb/Nb5Si3 in-situ composites by mechanical milling and reactive spark plasma sintering
Ma, CL
Kasama, A
Tan, Y
Tanaka, H
Tanaka, R
Mishima, Y
Hanada, S
MATERIALS TRANSACTIONS JIM, 2000, 41 (06): : 719 - 726
[14] Effects of Si, W and W-Mo on isothermal oxidation behaviors of Nb/Nb5Si3 in situ composites at high temperature
Xiong, Bowen
Cai, Changchun
Wan, Hong
Zheng, Yuhui
JOURNAL OF ALLOYS AND COMPOUNDS, 2009, 486 (1-2) : 330 - 334
[15] Effects of W and W-Mo Additions on Microstructures of Nb/Nb5Si3 in Situ Composites by Spark Plasma Sintering
Xiong Bowen
Long Wenyuan
Chen Zhe
Wan Hong
Yan Youwei
RARE METAL MATERIALS AND ENGINEERING, 2009, 38 (06) : 1112 - 1115
[16] Microstructures and room temperature fracture toughness of Nb/Nb5Si3 composites alloyed with W, Mo and W-Mo fabricated by spark plasma sintering
Xiong, Bowen
Cai, Changchun
Wang, Zhenjun
JOURNAL OF ALLOYS AND COMPOUNDS, 2014, 604 : 211 - 216
[17] Fabrication of Nb/Nb5Si3 in-situ Composites by SPS-Casting Technology
Long Wenyuan
Xia Chun
Chen Zhe
Yan Youwei
RARE METAL MATERIALS AND ENGINEERING, 2010, 39 (08) : 1427 - 1430
[18] Effect of HfC addition on mechanical properties of Nb-5Mo-2W-18Si in-situ composites
Wang, SW
Hirai, H
Tabaru, T
Kitahara, A
Ueno, H
ADVANCES IN FRACTURE AND FAILURE PREVENTION, PTS 1 AND 2, 2004, 261-263 : 1439 - 1444
[19] Mo effect on the phase stability and room-temperature fracture toughness of Nb/Nb5Si3 in-situ composites
LI Wei
Rare Metals, 2005, (01) : 87 - 91
[20] Mo effect on the phase stability and room-temperature fracture toughness of Nb/Nb5Si3 in-situ composites
Li, W
Yang, HB
Shan, AD
Wu, JS
RARE METALS, 2005, 24 (01) : 87 - 91

← 1 2 3 4 5 →