Study of the mechanical properties of Ti-and Cr-based multicomponent hard coatings

被引：1

作者：

Cholakova, Tetiana ^{[1
]}

Chitanov, Vasilliy ^{[1
]}

Kolaklieva, Lilyana ^{[1
]}

Kakanakov, Roumen ^{[1
]}

Balashev, Konstantin ^{[2
]}

Ranguelov, Bogdan ^{[3
]}

Rupetchov, Velko ^{[4
]}

Mishev, Georgi ^{[4
]}

机构：

[1] Bulgarian Acad Sci, Cent Lab Appl Phys, Plovdiv, Bulgaria

[2] Sofia Univ, Dept Phys Chem, Lab Biophys Chem, Sofia, Bulgaria

[3] Bulgarian Acad Sci, Inst Phys Chem, Sofia, Bulgaria

[4] Paisii Hilendarski Univ, Tech Coll Smolyan, Plovdiv, Bulgaria

来源：

13TH NATIONAL CONGRESS ON THEORETICAL AND APPLIED MECHANICS (NCTAM 2017) | 2018年 / 145卷

关键词：

MAGNETRON; FILMS;

D O I：

10.1051/matecconf/201814502003

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

TiCrA1N and CrTiA1N multicomponent coatings have been developed using closed-field unbalanced magnetron sputtering technique (CFUBMS) in a gas mixture of Ar + N2. The nitrogen level was varied by using the feedback control of plasma optical emission monitor (OEM). An investigation into the effect of the CFUBMS process parameters on the properties of the coatings was undertaken. The main coatings parameters such as thickness, surface morphology, nanohardness, strength of adhesion and wear resistance were studied by means of ball-cratering method, atomic force microscopy, scanning electron microscopy, scratch tests and nanoindentation measurements. The study revealed strong dependency of the mechanical properties on the nitrogen flow rate. Analysis of the experimental results showed that Cr-based multicomponent coatings possess better mechanical properties than Ti-based coatings at a nitrogen flow rate of 21 sccm: higher value of hardness (<= 31GPa) and higher scratch resistance (> 30 N).

引用

页数：9

共 50 条

[1] CORROSION PROPERTIES OF SELECTED CR-BASED HARD AND PROTECTIVE COATINGS
MILOSEV, I
NAVINSEK, B
SURFACE & COATINGS TECHNOLOGY, 1993, 60 (1-3): : 545 - 548
[2] Comparison of structural and chemical properties of Cr-based hard coatings
Cekada, M
Panjan, P
Macek, M
Smíd, P
SURFACE & COATINGS TECHNOLOGY, 2002, 151 : 31 - 35
[3] The structure and mechanical properties of Cr-based Cr-Ti alloy films
Liu, Gang
Wang, Miao
Xu, Jianjun
Huang, Min
Wang, Chen
Fu, Yabo
Lin, Changhong
Wu, Jianbo
Levchenko, Vladimir A.
MATERIALS RESEARCH EXPRESS, 2022, 9 (01)
[4] Ti- and Cr-based hard coatings obtained at low temperatures by unbalanced magnetron sputtering
Cholakova, T. M.
Chitanov, V.
Kolaklieva, L. P.
Kakanakov, R. D.
Ranguelov, B.
Atanasova, S.
Stefanov, P. K.
Atanasova, G. B.
Balashev, K.
20TH INTERNATIONAL SUMMER SCHOOL ON VACUUM, ELECTRON AND ION TECHNOLOGIES, 2017, 2018, 992
[5] Influence of AlN layers on mechanical properties and thermal stability of Cr-based nitride coatings
Schloegl, M.
Paulitsch, J.
Keckes, J.
Mayrhofer, P. H.
THIN SOLID FILMS, 2013, 531 : 113 - 118
[6] Property Comparation of Ti-based and Cr-based PVD Nitride Coatings
Liu, Ai-hua
PROCEEDINGS OF 2014 INTERNATIONAL CONFERENCE ON MATERIAL SCIENCE AND ENGINEERING, 2014, 1035 : 292 - 295
[7] Investigation of the tribological properties of high-feed milled structures and Cr-based hard PVD-coatings
Tillmann, Wolfgang
Stangier, Dominic
Laemmerhirt, Iris-Aya
Biermann, Dirk
Freiburg, Dennis
VACUUM, 2016, 131 : 5 - 13
[8] Modified electrolytic Cr-based composite coatings
Yar-Mukhamedova, GS
MATERIALS SCIENCE, 1999, 35 (04) : 601 - 602
[9] Modified electrolytic Cr-based composite coatings
G. Sh. Yar-Mukhamedova
Materials Science, 1999, 35 : 601 - 602
[10] Effect of C content on microstructure and mechanical properties of Cr-based hard composites obtained by different sintering methods
Deng, Xiangxing
Zheng, Ruonian
Manuel Torralba, Jose
Garcia-Junceda, Andrea
Wang, Yangwei
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2022, 848

← 1 2 3 4 5 →