Effect of melt cleanliness on the formation of porosity defects in automotive aluminium high pressure die castings

被引：44
作者：
Tian, C [1 ]
Law, J
van der Touw, J
Murray, M
Yao, JY
Graham, D
John, DS
机构：
[1] CSIRO, Mfg Sci & Technol, Preston, Vic, Australia
[2] Nissan Casting Australia Pty Ltd, Dandenong, Vic, Australia
[3] CSIRO, Math & Informat Sci, Clayton, Vic 3168, Australia
[4] Univ Queensland, CAST, St Lucia, Qld, Australia
来源：
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY | 2002年 / 122卷 / 01期
关键词：
porosity; casting porosity; high pressure die casting; melt cleanliness; inclusions;
D O I：
10.1016/S0924-0136(01)01229-8
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The effect of melt cleanliness on the formation of porosity defects in automotive aluminium high pressure die castings (TA Transmission Case) was investigated experimentally. The experiments were conducted under actual industrial production conditions at Nissan Casting Australia Pty Ltd. (NCAP). It was found that the probability of rejection due to excessive porosity present at critical locations in the castings (determined using a real-time X-ray radiographic method) increased as the number of inclusions in the melt (measured with LiMCA II) increased. The types of inclusion in the melt were identified as mainly amorphous oxides, oxide films and sludge particles. (C) 2002 Published by Elsevier Science B.V.
引用
收藏
页码：82 / 93
页数：12
相关论文
共 50 条
[31]   Simulation of mold filling and prediction of gas entrapment on practical high pressure die castings [J].
Zhao Hai-dong ;
Bai Yan-fei ;
Ouyang Xiao-xian ;
Dong Pu-yun .
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, 2010, 20 (11) :2064-2070
[32]   The effect of aluminium content on the eutectic morphology of high pressure die cast magnesium-aluminium alloys [J].
Dargusch, M. S. ;
Nave, M. ;
McDonald, S. D. ;
StJohn, D. H. .
JOURNAL OF ALLOYS AND COMPOUNDS, 2010, 492 (1-2) :L64-L68
[33]   Integration of Additive Fabrication with High-Pressure Die Casting for Quality Structural Castings of Aluminium Alloys; Optimising Energy Consumption [J].
Abhinav Anand ;
Devarajan Nagarajan ;
Mohamed El Mansori ;
Tharmalingam Sivarupan .
Transactions of the Indian Institute of Metals, 2023, 76 :347-379
[34]   The Metallurgy of Aluminum Alloys for Structural High-Pressure Die Castings [J].
Sigworth, Geoffrey K. ;
Donahue, Raymond J. .
INTERNATIONAL JOURNAL OF METALCASTING, 2021, 15 (03) :1031-1046
[35]   The Metallurgy of Aluminum Alloys for Structural High-Pressure Die Castings [J].
Geoffrey K. Sigworth ;
Raymond J. Donahue .
International Journal of Metalcasting, 2021, 15 :1031-1046
[36]   Microstructural characteristics of the surface layer in high-pressure die castings [J].
Otarawanna, S. ;
Denmud, N. ;
Vetayanugul, B. ;
Phongphisutthinan, C. .
INTERNATIONAL JOURNAL OF CAST METALS RESEARCH, 2015, 28 (06) :356-364
[37]   Numerical Simulation of Door Lock Plates Castings Produced by High Pressure Die Casting process [J].
Mahmoud, M. G. ;
Abdelghany, Amr ;
Salem, Serag .
INTERNATIONAL JOURNAL OF METALCASTING, 2023, 17 (02) :847-859
[38]   A simple procedure to assess the Complete Melt Quality in aluminium castings: implementation in a die-casting and a rheo-casting [J].
Bogdanoff, Toni ;
Tiryakioglu, Murat ;
Jarfors, Anders E. W. ;
Ghassemali, Ehsan .
INTERNATIONAL JOURNAL OF CAST METALS RESEARCH, 2024, 37 (01) :71-79
[39]   The effect of grain refinement on the formation of casting defects in alloy 356 castings [J].
Easton, MA ;
StJohn, DH .
INTERNATIONAL JOURNAL OF CAST METALS RESEARCH, 2000, 12 (06) :393-408
[40]   Effect of die temperature and melt quality on a commercial low pressure die casting [J].
de Looze, G .
SHAPING CASTING: THE JOHN CAMPBELL SYMPOSIUM, 2005, :423-432
12345