The effect of FexO content on dissolution behavior of an alumina inclusion in CaO-Al2O3-SiO2-FexO slag by a single hot thermocouple technique

被引：11

作者：

Um, Hyungsic ^{[1
,2
]}

Yeo, Sangrok ^{[1
]}

Kang, Youn-Bae ^{[3
]}

Chung, Yongsug ^{[1
]}

机构：

[1] Tech Univ Korea, Dept Adv Mat Engn, 237 Sangidaehak Ro, Shiheung Si 15073, South Korea

[2] Dongkuk Steel Co, R&D Ctr, 70 Geonposaneop Ro 3214beon Gil, Pohang Si 37874, Gyeongsangbuk D, South Korea

[3] Pohang Univ Sci & Technol, Grad Inst Ferrous & Energy Mat Technol, 77 Cheongam Ro, Pohang Si 37673, Gyeongsangbuk D, South Korea

来源：

CERAMICS INTERNATIONAL | 2022年 / 48卷 / 23期

关键词：

Dissolution; Slag; Single hot thermocouple technique; CERAMIC SYSTEMS; SINTERED ALUMINA; MGO INCLUSIONS; AL2O3; OXIDE; CORROSION; SAPPHIRE; STEEL;

D O I：

10.1016/j.ceramint.2022.08.132

中图分类号：

TQ174 [陶瓷工业]; TB3 [工程材料学];

学科分类号：

0805 ; 080502 ;

摘要：

The dissolution behavior between CaO-SiO2-Al2O3-FexO slag and Al2O3 particles was studied by the Single Hot Thermocouple technique (SHTT) at 1550 degrees C. The FexO content in the slag with a fixed basicity (CaO/SiO2 ratio) of 1 varied from 10 to 30%. The dissolution behavior between slag with transition metal oxides and Al2O3 particles was investigated through a new research method of the Single Hot Thermocouple Technique (SHTT), which is a fast quenching method. The conditions under which the SHTT is possible were derived as a stability diagram. The results of the experiment revealed that the dissolution rate of the Al2O3 particles increased with an increasing FexO content in the range of 0-20% FexO content of slag, but the dissolution rate of Al2O3 particles did not increase when the FexO content was 30%. It was found that the Ca(Al, Fe)12O19 phase was formed in the slag with 30% FexO content.

引用

页码：35301 / 35309

页数：9

共 37 条

[1] Dissolution behavior of alumina in mold fluxes for steel continuous casting [J].

Bui, AH ;

Ha, HM ;

Kang, YB ;

Chung, IS ;

Lee, HG .

METALS AND MATERIALS INTERNATIONAL, 2005, 11 (03) :183-190

[2] A Novel Method of Research on Dissolution Kinetics of Alumina in Mold Flux Based on Hot Thermocouple Technique [J].

Chen, Fuhang ;

Tang, Ping ;

Wen, Guanghua ;

Gu, Shaopeng .

TMS 2020 149TH ANNUAL MEETING & EXHIBITION SUPPLEMENTAL PROCEEDINGS, 2020, :57-66

[3] Diffusional dissolution of alumina in various steelmaking slags [J].

Cho, WD ;

Fan, P .

ISIJ INTERNATIONAL, 2004, 44 (02) :229-234

[4] Dissolution rate of Al2O3 into molten CaO-SiO2-Al2O3 slags [J].

Choi, JY ;

Lee, HG ;

Kim, JS .

ISIJ INTERNATIONAL, 2002, 42 (08) :852-860

[5] DISSOLUTION IN CERAMIC SYSTEMS .1. MOLECULAR DIFFUSION, NATURAL CONVECTION, AND FORCED CONVECTION STUDIES OF SAPPHIRE DISSOLUTION IN CALCIUM ALUMINUM SILICATE [J].

COOPER, AR ;

KINGERY, WD .

JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 1964, 47 (01) :37-43

[6] CONTROL OF THE ALUMINUM-OXYGEN REACTION IN PURE IRON MELTS [J].

DIMITROV, S ;

WEYL, A ;

JANKE, D .

STEEL RESEARCH, 1995, 66 (01) :3-7

[7] Future steelmaking technologies and the role of basic research [J].

Fruehan, RJ .

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 1997, 28 (10) :1963-1973

[8] Active Tundish Slag [J].

Holappa, Lauri ;

Kekkonen, Marko ;

Louhenkilpi, Seppo ;

Hagemann, Rene ;

Schroeder, Christina ;

Scheller, Piotr .

STEEL RESEARCH INTERNATIONAL, 2013, 84 (07) :638-648

[9] Improvement of castability and anality of continuously cast steel [J].

Janke, D ;

Ma, ZT ;

Valentin, P ;

Heinen, A .

ISIJ INTERNATIONAL, 2000, 40 (01) :31-39

[10] Computer applications of thermodynamic databases to inclusion engineering [J].

Jung, IH ;

Decterov, SA ;

Pelton, AD .

ISIJ INTERNATIONAL, 2004, 44 (03) :527-536

← 1 2 3 4 →