Fretting fatigue and friction of quenched and tempered steel in dry contact with aluminum bronze

被引：7

作者：

Hintikka, Jouko ^{[1
]}

Lehtovaara, Arto ^{[1
]}

Mantyla, Antti ^{[2
]}

机构：

[1] Tampere Univ Technol, Dept Mech & Design, FIN-33101 Tampere, Finland

[2] Wartsila Finland Oy, Res & Dev, Vaasa 65101, Finland

来源：

WEAR | 2013年 / 308卷 / 1-2期

关键词：

Fretting fatigue; Quenched and tempered steel; Bronze; Partial slip; Gross sliding; CRACK INITIATION; BEHAVIOR; PREDICTION; WEAR;

D O I：

10.1016/j.wear.2013.07.002

中图分类号：

TH [机械、仪表工业];

学科分类号：

0802 ;

摘要：

Bronze-steel contacts are common in machinery where the loading might give rise to fretting conditions. The flat surfaces of the quenched and tempered steel (QT) specimens were fretted with aluminum bronze spheres in partial slip and gross sliding conditions. The dry friction coefficient was around unity in gross sliding. Material transfer occurred from bronze pad to the QT-specimen and cracks initiated at these locations. Fretting map comparisons with QT-QT fretting tests showed that aluminum bronze-QT contact produces fatigue cracks with lower values in terms of displacement amplitude, tangential force amplitude and Findley cracking risk. (C) 2013 Elsevier B.V. All rights reserved.

引用

页码：155 / 165

页数：11

共 32 条

[1] A study on fretting friction evolution and fretting fatigue crack initiation for a spherical contact [J].

Alfredsson, B ;

Cadario, A .

INTERNATIONAL JOURNAL OF FATIGUE, 2004, 26 (10) :1037-1052

[2] Using a dovetail fixture to study fretting fatigue and fretting palliatives [J].

Conner, BP ;

Nicholas, T .

JOURNAL OF ENGINEERING MATERIALS AND TECHNOLOGY-TRANSACTIONS OF THE ASME, 2006, 128 (02) :133-141

[3] AMPLITUDE-CONTROLLED TRANSITIONS IN FRETTING - THE COMPARATIVE BEHAVIOR OF 6 MATERIALS [J].

CRONIN, J ;

WARBURTON, J .

TRIBOLOGY INTERNATIONAL, 1988, 21 (06) :309-315

[4] EDGE-BONDED DISSIMILAR ORTHOGONAL ELASTIC WEDGES UNDER NORMAL AND SHEAR LOADING [J].

DUNDURS, J ;

BOGY, DB .

JOURNAL OF APPLIED MECHANICS, 1969, 36 (03) :650-&

[5] A quantitative approach of Ti-6Al-4V fretting damage:: friction, wear and crack nucleation [J].

Fouvry, S ;

Duó, P ;

Perruchaut, P .

WEAR, 2004, 257 (9-10) :916-929

[6] ANALYSIS OF SLIDING BEHAVIOR FOR FRETTING LOADINGS - DETERMINATION OF TRANSITION CRITERIA [J].

FOUVRY, S ;

KAPSA, P ;

VINCENT, L .

WEAR, 1995, 185 (1-2) :35-46

[7] Quantification of fretting damage [J].

Fouvry, S ;

Kapsa, P ;

Vincent, L .

WEAR, 1996, 200 (1-2) :186-205

[8] Impact of contact size and complex gross-partial slip conditions on Ti-6Al-4V/Ti-6Al-4V fretting wear [J].

Fouvry, S. ;

Paulin, C. ;

Deyber, S. .

TRIBOLOGY INTERNATIONAL, 2009, 42 (03) :461-474

[9] Prediction of cracking in Ti-6Al-4V alloy under fretting-wear: use of the SWT criterion [J].

Fridrici, V ;

Fouvry, S ;

Kapsa, P ;

Perruchaut, P .

WEAR, 2005, 259 (1-6) :300-308

[10] EXPLICIT EQUATIONS FOR THE STRESSES BENEATH A SLIDING SPHERICAL CONTACT [J].

HAMILTON, GM .

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE, 1983, 197 (MAR) :53-59

← 1 2 3 4 →