Macroporous poly(vinyl chloride)-polypyrrole composites with piezoresistive behaviour

被引：4

作者：

Tyagi, Prashant ^{[1
]}

Chaturvedi, Ranjan ^{[1
]}

Gorhe, Nikhil Rajendra ^{[1
]}

机构：

[1] CSIR, Adv Mat & Proc Res Inst, Bhopal 462026, Madhya Pradesh, India

来源：

MATERIALS LETTERS | 2020年 / 280卷

关键词：

Composite materials; Polymers; Polypyrrole; Poly(vinyl chloride); Piezoresistive; Macroporous; PRESSURE; GRAPHENE; SENSORS; STRAIN; ELASTICITY; SPONGE;

D O I：

10.1016/j.matlet.2020.128566

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

Flexible macroporous composites based on commercially ubiquitous poly(vinyl chloride) (PVC) coated with thin layer of conducting polypyrrole (PPy) were investigated for their piezoresistive characteristics. Macroporous discs were achieved via a thermally assisted and solvent free approach employing common salt as sacrificial template. Coating of PPy was obtained via vapor phase oxidative polymerization and two type of composites (PPyF60 and PPyF75) with different compressibility were prepared by varying PVC-salt ratio (1:4 and 1:5). Composite PPyF60 exhibited higher compressive strength (5.34 MPa vs 3.78 MPa) due to less porosity. In terms of piezoresistive behaviour however PPyF75 exhibited higher pressure sensitivity (0.149 kPa(-1)) and gauge factor (8.22). Both composites showed good signal stability during continuous cyclic strain and dynamic pressure. (C) 2020 Elsevier B.V. All rights reserved.

引用

页数：4

共 50 条

[31] Comparison of electrical and electrochemical properties between poly(vinyl chloride) and poly(vinyl methylaniline) composites with polyaniline
Park, YH
Yang, KY
MOLECULAR CRYSTALS AND LIQUID CRYSTALS, 2004, 425 : 501 - 507
[32] Conductive polymer composites prepared by polypyrrole-coated poly(vinyl chloride) powder: relationship between conductivity and surface morphology
Ouyang, M
Chan, CM
POLYMER, 1998, 39 (10) : 1857 - 1862
[33] XPS STUDIES OF ENVIRONMENTAL STABILITY OF POLYPYRROLE-POLY(VINYL ALCOHOL) COMPOSITES
BENSEDDIK, E
MAKHLOUKI, M
BERNEDE, JC
LEFRANT, S
PRON, A
SYNTHETIC METALS, 1995, 72 (03) : 237 - 242
[34] Mechanical and thermal properties of nano-composites of poly(vinyl chloride) and co-poly(vinyl chloride-vinyl alcohol-vinyl acetate) with montmorillonite
Bibi, Navida
Sarwar, Muhammad Ilyas
Ishaq, Muhammad
Ahmad, Zahoor
POLYMERS & POLYMER COMPOSITES, 2007, 15 (04): : 313 - 319
[35] Phase behavior of supercritical CO2/styrene/poly(vinyl chloride) system and synthesis of polystyrene/poly(vinyl chloride) composites
Li, D
Han, BX
MACROMOLECULES, 2000, 33 (12) : 4555 - 4560
[36] Negative thermal coefficient behaviour, dielectric and mechanical properties of poly(vinyl chloride)/poly(vinyl alcohol) blends
Raheem, Mohd Abdul
Roy, Aashish S.
Prasad, M. V. N. Ambika
COMPOSITES COMMUNICATIONS, 2016, 1 : 38 - 43
[37] PREPARATION OF POLYPYRROLE-POLY(VINYL CHLORIDE) COMPOSITE FILMS BY INTERPHASE OXIDATIVE POLYMERIZATION
NAKATA, M
KISE, H
POLYMER JOURNAL, 1993, 25 (01) : 91 - 94
[38] Thermal degradation behaviour of poly(vinyl chloride) in the presence of poly(N′-acryloyl benzhydrazide)
Mohamed, Nadia Ahmed
Al-mehbad, Noura Yahya
POLYMER DEGRADATION AND STABILITY, 2009, 94 (04) : 540 - 543
[39] BLENDS OF POLYPYRROLE AND POLY(VINYL ALCOHOL)
WANG, HL
FERNANDEZ, JE
MACROMOLECULES, 1993, 26 (13) : 3336 - 3339
[40] Impact behaviour of an innovative plasticized poly(vinyl chloride) for the automotive industry
Bernard, C. A.
Bahlouli, N.
Wagner-Kocher, C.
Ahzi, S.
Remond, Y.
DYMAT 2015 - 11TH INTERNATIONAL CONFERENCE ON THE MECHANICAL AND PHYSICAL BEHAVIOUR OF MATERIALS UNDER DYNAMIC LOADING, 2015, 94

← 1 2 3 4 5 →