A Study on Extrusion Deformation Behavior of ZAM631 Magnesium Alloy Using the Rigid Plastic Finite Element Method

被引：9
作者：
Choi, Ki Soon [1 ,2 ]
Hwang, Ji Loon [1 ,2 ]
Lee, Kyunghoon [3 ]
Shin, Kwang Seon [1 ,2 ]
机构：
[1] Seoul Natl Univ, Magnesium Technol Innovat Ctr, Seoul 151742, South Korea
[2] Seoul Natl Univ, Res Inst Adv Mat, Sch Mat Sci & Engn, Seoul 151742, South Korea
[3] Solut Lab, Taejon 302834, South Korea
来源：
KOREAN JOURNAL OF METALS AND MATERIALS | 2015年 / 53卷 / 08期
关键词：
alloys; extrusion; microstructure; compression test; finite element method; DYNAMIC RECRYSTALLIZATION; FLOW-STRESS; MECHANICAL-PROPERTIES; TENSILE PROPERTIES; ROLLING PROCESS; NONBASAL SLIP; CAST; MICROSTRUCTURE; EVOLUTION; SIMULATION;
D O I：
10.3365/KJMM.2015.53.8.569
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
A uniaxial hot compression test was carried out under a strain rate range of 10(-3)similar to 1/s at a temperature range of 533 similar to 653K to evaluate the flow stress features of ZAM631 Magnesium (Mg) alloy. The peak value of flow stress increased with increasing strain rate at constant temperature. In contrast, an increase in the deformation temperature at a constant strain rate resulted in a decrease of the peak value of the flow stress. Microstructure examination of the specimens showed that dynamic recrystallization (DRX) took place in both compressed and extruded specimens. The flow stress information was further used to simulate the indirect extrusion process for the ZAM631 alloy. Non-isothermal finite element simulations were carried out by a rigid plastic finite element method. Extrusion deformation behaviors such as temperature, strain rate and strain were compared at different locations of the deformed billet during extrusion.
引用
收藏
页码：569 / 577
页数：9
相关论文
共 50 条
  • [41] Discussion on size effect of footing in ultimate bearing capacity of sandy soil using rigid plastic finite element method
    Nguyen, Du L.
    Ohtsuka, S.
    Hoshina, T.
    Isobe, K.
    SOILS AND FOUNDATIONS, 2016, 56 (01) : 93 - 103
  • [42] Researches on a novel severe plastic deformation method combining direct extrusion and shearings for AZ61 magnesium alloy based on numerical simulation and experiments
    Hongjun Hu
    Zhao Sun
    zhongwen Ou
    xiaoqing Wang
    Metals and Materials International, 2017, 23 : 582 - 590
  • [43] The Study of the Vibratory Behavior of Electromagnetic Devices Using Finite Element Method Techniques
    Ferkha, Nassira
    Torregrossa, Dimitri
    Mekideche, Mohamed R.
    Miraoui, Abdellatif
    Peyraut, Francois
    Djerdir, Abdeslam
    COMPUTER FIELD MODELS OF ELECTROMAGNETIC DEVICES, 2010, 34 : 512 - 520
  • [44] Prediction of Welding Deformation Using the Thermal Elastic-Plastic Finite Element Method by Considering Welding Interpass Temperature
    Han, Young-Hwan
    Lim, Hun-Bong
    Shin, Tae-Sung
    Yang, Hyun-Ik
    MATERIALS, 2024, 17 (15)
  • [45] Compressive deformation behavior of closed cell LM-13 aluminum alloy foam using finite element analysis
    Verma, Karan Singh
    Panthi, Sanjay Kumar
    Mondal, D. P.
    MATERIALS TODAY-PROCEEDINGS, 2020, 28 : 1073 - 1077
  • [46] Cyclic contraction-expansion extrusion (CCEE): An innovate severe plastic deformation method for tailoring the microstructure and mechanical properties of magnesium AZ91 alloy
    Mashoufi, Kiarash
    Garmroodi, Peiman
    Mirzakhani, Amin
    Assempour, Ahmad
    JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2023, 26 : 8541 - 8554
  • [47] Predicting and Characterizing Plastic Deformation Behavior of Transversely-isotropic Carbon Fiber Monofilament Using Finite Element Simulation and Nanoindentation
    Hongzhou Li
    Chuntai Liu
    Jialian Chen
    Fibers and Polymers, 2021, 22 : 2316 - 2322
  • [48] Deformation behavior study of SAC305 solder joints under shear and tensile loading by crystal plasticity finite element method
    Zhu, Qingyun
    Huang, Zhiyong
    Qian, Hongjiang
    Wang, Jian
    Shen, Zeshuai
    Zhou, Qikai
    MICROELECTRONICS JOURNAL, 2024, 154
  • [49] Deformation behavior of a stiffened panel subjected to underwater shock loading using the non-linear finite element method
    Jen, Chan-Yung
    Tai, Yuh-Shiou
    MATERIALS & DESIGN, 2010, 31 (01): : 325 - 335
  • [50] A Numerical Method for Microstructure Generation of a Binary Aluminum Alloy and Study of Its Mechanical Properties Using the Finite Element Method
    Sharifi, Hamid
    Larouche, Daniel
    METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2014, 45A (13): : 5866 - 5875
12345