Structural performance and serviceability of concrete beams reinforced with hybrid (GFRP and steel) bars

被引:148
作者
El Refai, Ahmed [1 ]
Abed, Farid [2 ]
Al-Rahmani, Abdullah [2 ]
机构
[1] Univ Laval, Dept Civil & Water Engn, Quebec City, PQ G1V 0A6, Canada
[2] Amer Univ Sharjah, Dept Civil Engn, Sharjah, U Arab Emirates
关键词
Composite materials; Concrete beams; Cracking; Deformation; Ductility; Fiber reinforced polymer; Glass fiber; Hybrid methods; Reinforced concrete; Serviceability; EFFECTIVE MOMENT; INERTIA;
D O I
10.1016/j.conbuildmat.2015.08.063
中图分类号
TU [建筑科学];
学科分类号
0813 ;
摘要
This paper reports on the structural performance of concrete beams reinforced with hybrid reinforcement. Six concrete beams reinforced with a combination of steel and glass fiber-reinforced polymer (GFRP) bars and three other beams reinforced with only GFRP bars were tested in flexure. Over-reinforced hybrid beams showed higher strength and ductility than their GFRP-reinforced counterparts. The CSA-S806-12 equation accurately predicted the deflections of the hybrid-reinforced beams with high effective reinforcement ratios. Based on the test results, a bond coefficient was proposed to predict the crack width of the hybrid-reinforced beams using the ACI-440.1R-06 equation. A modified deformability factor was also utilized to assess the deformability of the hybrid-reinforced beams. Comparison between the experimental and predicted results showed the adequacy of the models used in predicting the load-carrying capacity, deflection, crack widths, and deformability of hybrid-reinforced concrete beams. (C) 2015 Elsevier Ltd. All rights reserved.
引用
收藏
页码:518 / 529
页数:12
相关论文
共 18 条
[1]  
ACI (American Concrete Institute), 2006, Guide for the Design and Construction of Concrete Reinforced with FRP bars
[2]   Structural performances of concrete beams with hybrid (fiber-reinforced polymer-steel) reinforcements [J].
Aiello, MA ;
Ombres, L .
JOURNAL OF COMPOSITES FOR CONSTRUCTION, 2002, 6 (02) :133-140
[3]  
[Anonymous], 1997, JSCE CONCR ENG SER
[4]  
[Anonymous], 2008, BUILDING CODE REQUIR
[5]  
[Anonymous], 2019, Design of concrete structures
[6]  
[Anonymous], 2012, Design and Construction of Building Structures with Fiber-Reinforced Polymers CAN/CSA S806-12
[7]   Deflection calculation of FRP reinforced concrete beams based on modifications to the existing Branson equation [J].
Bischoff, Peter H. .
JOURNAL OF COMPOSITES FOR CONSTRUCTION, 2007, 11 (01) :4-14
[8]  
Bischoff PH, 2007, ACI STRUCT J, V104, P68
[9]   Reevaluation of deflection prediction for concrete beams reinforced with steel and fiber reinforced polymer bars [J].
Bischoff, PH .
JOURNAL OF STRUCTURAL ENGINEERING-ASCE, 2005, 131 (05) :752-767
[10]   Tension stiffening and cracking of concrete reinforced with glass fiber reinforced polymer (GFRP) bars [J].
Bischoff, PH ;
Paixao, R .
CANADIAN JOURNAL OF CIVIL ENGINEERING, 2004, 31 (04) :579-588