Finite element analysis of drive axle housing with ANSYS Workbench

被引：2
|
作者：
Bai, Ningshan [1 ]
Jiao, Anyuan [2 ]
Liu, Shiming [2 ]
机构：
[1] Univ Sci & Technol Liaoning, Sch Mech Engn & Automat, Anshan 114051, Peoples R China
[2] Univ Sci & Technol Liaoning, Sch Higher Vocat Educ, Anshan 114051, Peoples R China
来源：
ADVANCES IN DESIGN TECHNOLOGY, VOLS 1 AND 2 | 2012年 / 215-216卷
关键词：
drive axle housing; finite element analysis; static analysis; ANSYS Workbench;
D O I：
10.4028/www.scientific.net/AMM.215-216.717
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
UG software was used to build the entity model for light truck driving axle housing, imported the model to ANSYS Workbench collaborative simulation software, and analyzed the stress after meshing and loading. It can be seen that the maximum equivalent stress of the drive axle housing under various conditions was less than the allowable stress value, and the evaluation index of vertical bending static strength experiment is K-n > 6, meeting the strength requirement; In the condition of full loads, the maximum deformation of the per-meter center distance is: 0.1 mm/m < 1.5 mm/m, also meeting the rigidity requirement; The experimental study is used to verify the analysis results referring the relative articles, shows that analysis results are reliable. This process provides reference for other driving axle housing and similar structure finite element analysis.
引用
收藏
页码：717 / +
页数：2
相关论文
共 50 条
  • [1] Finite Element Analysis of the Tractor Front Axle Housing Based on ANSYS
    Hu Dong-fang
    Liu Wen-hui
    VIBRATION, STRUCTURAL ENGINEERING AND MEASUREMENT I, PTS 1-3, 2012, 105-107 : 168 - 171
  • [2] Finite Element Analysis of Drive Axle Housing Based on the Solid Element and the Shell Element
    Fu, Jingshun
    Wang, Junfeng
    Wang, Jin
    MANUFACTURING SCIENCE AND TECHNOLOGY, PTS 1-8, 2012, 383-390 : 5681 - 5685
  • [3] Finite-Element Analysis on Lightweight Material of Drive Axle Housing
    Zhao, Feifei
    REVUE DES COMPOSITES ET DES MATERIAUX AVANCES-JOURNAL OF COMPOSITE AND ADVANCED MATERIALS, 2021, 31 (01): : 41 - 49
  • [4] Finite Element Modal Analysis on the Drive Axle Housing of Heavy Truck
    Qian, Jia
    Li, Wang
    ADVANCES IN MECHATRONICS AND CONTROL ENGINEERING III, 2014, 678 : 547 - +
  • [5] Finite Element Analysis of Lcomotive Axle based on ANSYS
    Hu Xinwei
    Zhang Xuhui
    Xie Fang
    Wang Guipeng
    2020 5TH INTERNATIONAL CONFERENCE ON MECHANICAL, CONTROL AND COMPUTER ENGINEERING (ICMCCE 2020), 2020, : 485 - 488
  • [6] Finite Element Analysis of Drive Axle of Truck
    WenXiaoXia
    DuZiXue
    QinSongTao
    2011 3RD WORLD CONGRESS IN APPLIED COMPUTING, COMPUTER SCIENCE, AND COMPUTER ENGINEERING (ACC 2011), VOL 4, 2011, 4 : 444 - 449
  • [7] Finite Element Analysis and Structural Optimization of the Box on the ANSYS Workbench
    Cheng, Kun
    MECHATRONICS AND INTELLIGENT MATERIALS, PTS 1 AND 2, 2011, 211-212 : 434 - 439
  • [8] Finite Element Analysis of Moving Platform Based on ANSYS Workbench
    Hu, Hanyuan
    Zhang, Lizhong
    Bai, Yangyang
    Hong, Jin
    INTERNATIONAL CONFERENCE ON ENGINEERING TECHNOLOGY AND APPLICATION (ICETA 2015), 2015, 22
  • [9] Finite Element Analysis of Crystal Furnace Based on ANSYS Workbench
    Yuan, Bing
    Liu, Yunxia
    Yang, Junliang
    MATERIALS, MECHANICAL AND MANUFACTURING ENGINEERING, 2014, 842 : 427 - 432
  • [10] Effects of Geometry Design Parameters on the Fatigue Failure of a Drive Axle Housing using Finite Element Analysis
    Pervan, Nedim
    Trobradovic, Mirsad
    Muminovic, Adis J.
    Lulic, Haris
    Metovic, Sadjit
    Hadziabdic, Vahidin
    ENGINEERING TECHNOLOGY & APPLIED SCIENCE RESEARCH, 2024, 14 (01) : 12567 - 12573
12345