Fracture study in notched ductile polymeric plates subjected to mixed mode I/II loading: Application of equivalent material concept

被引:32
作者
Rahimi, A. S. [1 ]
Ayatollahi, M. R. [1 ]
Torabi, A. R. [2 ]
机构
[1] Iran Univ Sci & Technol, Sch Mech Engn, Ctr Excellence Expt Solid Mech & Dynam, Fatigue & Fracture Res Lab, Tehran 16846, Iran
[2] Univ Tehran, Fac New Sci & Technol, Fracture Res Lab, POB 14395-1561, Tehran, Iran
关键词
Ductile fracture; Equivalent material Concept (EMC); Load-carrying capacity (LCC); Mixed mode I/II loading; Polymeric material; U-notch; DIGITAL IMAGE CORRELATION; BRITTLE-FRACTURE; EPOXY-RESIN; SHAPED NOTCHES; V-NOTCHES; COMPONENTS; CRITERION; BEHAVIOR; PMMA; MECHANISMS;
D O I
10.1016/j.euromechsol.2018.01.009
中图分类号
O3 [力学];
学科分类号
08 ; 0801 ;
摘要
Fracture of a ductile polymeric material containing U-notches is studied both experimentally and theoretically under mixed mode I/II loading conditions. Rectangular plates containing a central bean-shaped slit with two U-shaped ends are utilized for conducting fracture tests. Specimens with different notch inclination angles and various notch tip radii are loaded under remote tension to measure their load-carrying capacities (LCCs) experimentally. The Equivalent Material Concept (EMC) is reformulated to be utilized for theoretically predicting the obtained experimental results. For this purpose, the maximum tangential stress (MTS) and the mean stress (MS) criteria are combined with EMC. As the main novelty of this research, it is revealed that both the EMC-MTS and EMC-MS criteria, which have been more recently used for studying only pure mode I fracture behavior of U-notched epoxy resin, can provide very good predictions to the experimental results obtained under mixed mode I/II loading conditions.
引用
收藏
页码:37 / 43
页数:7
相关论文
共 50 条
[41]   Investigation of ductile rupture in U-notched Al 6061-T6 plates under mixed mode loading [J].
Torabi, A. R. ;
Habibi, R. .
FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES, 2016, 39 (05) :551-565
[42]   Application of the equivalent material concept to the study of the ductile failure due to U-notches [J].
Gomez, F. J. ;
Torabi, A. R. .
INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING, 2019, 172 :65-69
[43]   On the use of Brazilian disk specimen for measuring mixed-mode I/II translaminar fracture toughness of notched glass/epoxy composite laminates: A comprehensive study [J].
Torabi, A. R. ;
Bahrami, B. ;
Motamedi, M. A. ;
Hasanvand, H. .
THEORETICAL AND APPLIED FRACTURE MECHANICS, 2022, 121
[44]   On the applicability of ASED criterion for predicting mixed mode I plus II fracture toughness results of a rock material [J].
Aliha, M. R. M. ;
Berto, F. ;
Mousavi, A. ;
Razavi, N. .
THEORETICAL AND APPLIED FRACTURE MECHANICS, 2017, 92 :198-204
[45]   Elastic-Plastic Fracture Analysis of Notched Al 7075-T6 Plates by Means of the Local Energy Combined with the Equivalent Material Concept [J].
Torabi, A. R. ;
Berto, F. ;
Campagnolo, A. .
PHYSICAL MESOMECHANICS, 2016, 19 (02) :204-214
[46]   Mixed-mode I/ II fracture study of polymer composites using Single Edge Notched Bend specimens [J].
Rizov, V. .
COMPUTATIONAL MATERIALS SCIENCE, 2013, 77 :1-6
[47]   A simple, fast, and robust criterion for predicting fracture load and crack growth path in notched elastoplastic plates under mixed-mode loading [J].
Hasaninia, M. ;
Torabi, A. R. ;
Bahrami, B. .
THEORETICAL AND APPLIED FRACTURE MECHANICS, 2024, 133
[48]   A Successful Combination of the Equivalent Material Concept and the Averaged Strain Energy Density Criterion for Predicting Crack Initiation from Blunt V-Notches in Ductile Aluminum Plates under Mixed Mode Loading [J].
Torabi, A. R. ;
Campagnolo, A. ;
Berto, F. .
PHYSICAL MESOMECHANICS, 2016, 19 (04) :382-391
[49]   The influence of temperatures on the mechanical properties and fracture behavior of rocks under mixed mode I/II loading [J].
Hu, Xunjian ;
Yu, Yang ;
Lacidogna, Giuseppe ;
Gong, Xiaonan .
ENGINEERING FRACTURE MECHANICS, 2024, 309
[50]   Fracture Behavior Investigation of a Typical Sandstone Under Mixed-Mode I/II Loading Using the Notched Deep Beam Bending Method [J].
Luo, Y. ;
Ren, L. ;
Xie, L. Z. ;
Ai, T. ;
He, B. .
ROCK MECHANICS AND ROCK ENGINEERING, 2017, 50 (08) :1987-2005