Fracture study in notched ductile polymeric plates subjected to mixed mode I/II loading: Application of equivalent material concept

被引：32
作者：
Rahimi, A. S. [1 ]
Ayatollahi, M. R. [1 ]
Torabi, A. R. [2 ]
机构：
[1] Iran Univ Sci & Technol, Sch Mech Engn, Ctr Excellence Expt Solid Mech & Dynam, Fatigue & Fracture Res Lab, Tehran 16846, Iran
[2] Univ Tehran, Fac New Sci & Technol, Fracture Res Lab, POB 14395-1561, Tehran, Iran
来源：
EUROPEAN JOURNAL OF MECHANICS A-SOLIDS | 2018年 / 70卷
关键词：
Ductile fracture; Equivalent material Concept (EMC); Load-carrying capacity (LCC); Mixed mode I/II loading; Polymeric material; U-notch; DIGITAL IMAGE CORRELATION; BRITTLE-FRACTURE; EPOXY-RESIN; SHAPED NOTCHES; V-NOTCHES; COMPONENTS; CRITERION; BEHAVIOR; PMMA; MECHANISMS;
D O I：
10.1016/j.euromechsol.2018.01.009
中图分类号：
O3 [力学];
学科分类号：
08 ; 0801 ;
摘要：
Fracture of a ductile polymeric material containing U-notches is studied both experimentally and theoretically under mixed mode I/II loading conditions. Rectangular plates containing a central bean-shaped slit with two U-shaped ends are utilized for conducting fracture tests. Specimens with different notch inclination angles and various notch tip radii are loaded under remote tension to measure their load-carrying capacities (LCCs) experimentally. The Equivalent Material Concept (EMC) is reformulated to be utilized for theoretically predicting the obtained experimental results. For this purpose, the maximum tangential stress (MTS) and the mean stress (MS) criteria are combined with EMC. As the main novelty of this research, it is revealed that both the EMC-MTS and EMC-MS criteria, which have been more recently used for studying only pure mode I fracture behavior of U-notched epoxy resin, can provide very good predictions to the experimental results obtained under mixed mode I/II loading conditions.
引用
收藏
页码：37 / 43
页数：7
相关论文
共 50 条
[1]   Mixed mode I/II fracture prediction of blunt V-notched nanocomposite specimens with nonlinear behavior by means of the Equivalent Material Concept [J].
Torabi, A. R. ;
Rahimi, A. S. ;
Ayatollahi, M. R. .
COMPOSITES PART B-ENGINEERING, 2018, 154 :363-373
[2]   Fracture study in notched graphite specimens subjected to mixed mode I/II loading: Application of XFEM based on the cohesive zone model [J].
Torabi, A. R. ;
Majidi, H. R. ;
Ayatollahi, M. R. .
THEORETICAL AND APPLIED FRACTURE MECHANICS, 2019, 99 :60-70
[3]   Extension of the Equivalent Material Concept to Compressive Loading: Combination with LEFM Criteria for Fracture Prediction of Keyhole Notched Polymeric Samples [J].
Torabi, Ali Reza ;
Hamidi, Kazem ;
Shahbazian, Behnam ;
Cicero, Sergio ;
Berto, Filippo .
APPLIED SCIENCES-BASEL, 2021, 11 (09)
[4]   Evaluation of the equivalent material concept in mixed mode I/III fracture estimation of V-notched Al7075-T6 plates [J].
Saboori, Behnam ;
Torabi, A. R. ;
Kamjoo, M. R. .
ENGINEERING FRACTURE MECHANICS, 2020, 237
[5]   Fracture of U- and V-notched Al6061-T6 plates: The first examination of the Fictitious Material Concept under mixed mode I/III loading [J].
Torabi, A. R. ;
Saboori, Behnam ;
Ghelich, Ali .
THEORETICAL AND APPLIED FRACTURE MECHANICS, 2020, 109
[6]   Extension of the virtual isotropic material concept to mixed mode I/II loading for predicting the last-ply-failure of U-notched glass/epoxy laminated composite specimens [J].
Torabi, A. R. ;
Pirhadi, E. .
COMPOSITES PART B-ENGINEERING, 2019, 176
[7]   Application of the Theory of Critical Distances for the Fracture Assessment of a Notched Limestone Subjected to Different Temperatures and Mixed Mode with Predominant Mode I Loading Conditions [J].
Justo, J. ;
Castro, J. ;
Cicero, S. .
ROCK MECHANICS AND ROCK ENGINEERING, 2021, 54 (05) :2335-2354
[8]   Mixed mode I/II failure prediction of thin U-notched ductile steel plates with significant strain-hardening and large strain-to-failure: The Fictitious Material Concept [J].
Torabi, A. R. ;
Kamyab, M. .
EUROPEAN JOURNAL OF MECHANICS A-SOLIDS, 2019, 75 :225-236
[9]   Fracture study of a ductile polymer-based nanocomposite weakened by blunt V-notches under mode I loading: Application of the Equivalent Material Concept [J].
Torabi, A. R. ;
Rahimi, A. S. ;
Ayatollahi, M. R. .
THEORETICAL AND APPLIED FRACTURE MECHANICS, 2018, 94 :26-33
[10]   Evaluation of the load-carrying capacity of notched ductile plates under mixed mode loading [J].
Torabi, A. R. ;
Keshavarzian, M. .
THEORETICAL AND APPLIED FRACTURE MECHANICS, 2016, 85 :375-386
12345