Focused ion beam (FIB) etching to investigate aluminium-coated polymer laminates subjected to heat and moisture loads

被引：21

作者：

Brunner, S. ^{[1
]}

Tharian, P. J. ^{[1
]}

Simmler, H. ^{[1
]}

Ghazi Wakili, K. ^{[1
]}

机构：

[1] Empa, Swiss Fed Labs Mat Testing & Res, CH-8600 Dubendorf, Switzerland

来源：

SURFACE & COATINGS TECHNOLOGY | 2008年 / 202卷 / 24期

关键词：

Scanning electron microscopy; Ion bombardment; Vacuum evaporation; Multilayer; Aluminium; Barrier envelopes;

D O I：

10.1016/j.surfcoat.2008.07.010

中图分类号：

TB3 [工程材料学];

学科分类号：

0805 ; 080502 ;

摘要：

Multilayered aluminium-coated polymer laminates are the common barrier envelopes of vacuum insulation panels used as high performance thermal insulation in building applications. These laminates are made of up to ten distinct layers including three aluminium barrier layers applied by vacuum web coating. During their expected lifetime, which is required to last longer than 20 years, they will be subjected to heat and moisture loads induced by internal and external climatic conditions. This paper investigates the deteriorations of the barrier function of two different laminates commonly used for the production of vacuum insulation panels. These were subjected to well defined exterior heat and moisture loads and investigated by means of focused ion beam etching. Delamination of the polyorethane adhesive layers and stress induced relaxation in them are made visible. Oxidised aluminium layers are also detected by this method. (c) 2008 Elsevier B.V. All rights reserved.

引用

页码：6054 / 6063

页数：10

共 21 条

[1]

[Anonymous], ENERGY USE BUILDINGS

[2] Cross-sectional analysis of hollow latex particles by focused ion beam-scanning electron microscopy [J].

Beach, E ;

Keefe, M ;

Heeschen, W ;

Rothe, D .

POLYMER, 2005, 46 (25) :11195-11197

[3] Focused ion beam milling and scanning electron microscopy characterization of polymer plus metal hybrids [J].

Brostow, Witold ;

Gorman, Brian P. ;

Olea-Mejia, Oscar .

MATERIALS LETTERS, 2007, 61 (06) :1333-1336

[4] Investigation of multilayered aluminium-coated polymer laminates by focused ion beam (FIB) etching [J].

Brunner, S ;

Gasser, P ;

Simmler, H ;

Ghazi Wakili, K .

SURFACE & COATINGS TECHNOLOGY, 2006, 200 (20-21) :5908-5914

[5] In situ performance assessment of vacuum insulation panels in a flat roof construction [J].

Brunner, Samuel ;

Simmler, Hans .

VACUUM, 2008, 82 (07) :700-707

[6] Climate warming impact on degree-days and building energy demand in Switzerland [J].

Christenson, M ;

Manz, H ;

Gyalistras, D .

ENERGY CONVERSION AND MANAGEMENT, 2006, 47 (06) :671-686

[7]

DOMININGHAUS H, 1992, KUNSTSTOFFE IHRE EIG

[8] Climate change impacts on building heating and cooling energy demand in Switzerland [J].

Frank, T .

ENERGY AND BUILDINGS, 2005, 37 (11) :1175-1185

[9] Vacuum insulation panels - Exciting thermal properties and most challenging applications [J].

Fricke, J. ;

Schwab, H. ;

Heinemann, U. .

INTERNATIONAL JOURNAL OF THERMOPHYSICS, 2006, 27 (04) :1123-1139

[10] Effective thermal conductivity of vacuum insulation panels [J].

Ghazi Wakili, K ;

Bundi, R ;

Binder, B .

BUILDING RESEARCH AND INFORMATION, 2004, 32 (04) :293-299

← 1 2 3 →