Simulation of heat transfer and analysis of impact of tool pin geometry and tool speed during friction stir welding of AZ80A Mg alloy plates

Peak temperature arising during the joining of metals by friction stir welding (FSW) needs to be investigated along with other process parameters of FSW to understand their inevitable impact on joint quality. This investigational and experimental analysis aims to determine the impact of pin geometry and its rotational speed by formulating thermic mechanical process-based models to anticipate peak temperature and to compare it with actual values. Three distinctive pin geometries rotated at three speeds were used while other parameters were unchanged. The fitness and suitability of the model were verified by comparing the anticipated values with the experimental values. Macrographic and micrographic observations revealed that flawless joints with improved mechanical properties were fabricated at a peak temperature of 616 K (80 % melting temperature) when a taper cylindrical pin with a rotational speed of 818 rpm was employed. In addition, SEM analysis of the fractured specimen confirmed that failure of the defect free weldment occurred in brittle mode, indicating that preferred fusion of grains and their constituents occurred during the joining process.