Strength and Fracture Behavior of Ultrathin Pt Wires

被引:2
作者
Akanda, M. A. Salam [1 ]
Tohmyoh, Hironori [2 ]
机构
[1] Bangladesh Univ Engn & Technol, Dept Mech Engn, Dhaka 1000, Bangladesh
[2] Tohoku Univ, Dept Nanomech, Aoba Ku, Sendai, Miyagi 9808579, Japan
关键词
mechanical properties; ultrathin wire; tensile test; fracture stress; yield stress; brittle fracture; ULTRAHIGH-STRENGTH; NANOWIRES; NANOTUBES;
D O I
10.1007/s10704-013-9805-8
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
Ultrathin metallic wires having defects may show much lower strength compared to the strength of the wire material. To characterize ultrathin Pt wires having the nominal diameter of 625 nm, tensile test of the wires was performed by developing a testing platform and a gripping technology. Fracture stress determined by the tensile test showed much higher value compared with that of bulk Pt. However, the fracture stress of some of the wires was lower than the yield stress of the wire determined by the bending test. From the observation of the fracture surfaces, it was found that the lower fracture stress of the wires was due to the defects in the wires and such wires showed brittle fracture behavior.
引用
收藏
页码:269 / 274
页数:6
相关论文
共 50 条
[41]   Fracture behavior and numerical study of resistance spot welded joints in high strength steel sheet [J].
Teruki, Sadasue ;
Satoshi, Igi ;
Koichi, Taniguchi ;
Rinsei, Ikeda ;
Kenji, Oi .
Yosetsu Gakkai Ronbunshu/Quarterly Journal of the Japan Welding Society, 2014, 32 (02) :64-72
[42]   Effect of hydrogen on the fracture behavior of high strength steel during slow strain rate test [J].
Wang, Maoqiu ;
Akiyama, Eiji ;
Tsuzaki, Kaneaki .
CORROSION SCIENCE, 2007, 49 (11) :4081-4097
[43]   A multiscale modeling on fracture and strength of graphene platelets reinforced epoxy [J].
Bian, Peiliang ;
Verestek, Wolfgang ;
Yan, Shuang ;
Xu, Xiang ;
Qing, Hai ;
Schmauder, Siegfried .
ENGINEERING FRACTURE MECHANICS, 2020, 235
[44]   Welding Thin Pt Wires with Dissimilar Diameters by Joule Heating [J].
Fujimori, Masato ;
Tohmyoh, Hironori .
JAPANESE JOURNAL OF APPLIED PHYSICS, 2013, 52 (06)
[45]   Insight into the Mechanical Properties and Fracture Behavior of Pt3Al Coating by Experiment and Theoretical Simulation [J].
Yong Pan .
Journal of Materials Engineering and Performance, 2021, 30 :2661-2668
[46]   Insight into the Mechanical Properties and Fracture Behavior of Pt3Al Coating by Experiment and Theoretical Simulation [J].
Pan, Yong .
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2021, 30 (04) :2661-2668
[47]   Analyzing the load-displacement behavior and determining fracture parameters and bond strength of high-strength nonfibrous and fibrous SCC mixtures [J].
Jameel, Ghassan Subhi ;
Ipek, Suleyman ;
Guneyisi, Erhan ;
Guneyisi, Esra Mete ;
Ahmed, Ahmed Dalaf .
JOURNAL OF BUILDING ENGINEERING, 2024, 85
[48]   Effects of Mg Content on the Fatigue Strength and Fracture Behavior of Al-Si-Mg Casting Alloys [J].
Wu, Ming-Ze ;
Zhang, Ji-Wang ;
Zhang, Yan-Bin ;
Wang, Hua-Qiang .
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2018, 27 (11) :5992-6003
[49]   Microstructure, mechanical properties and fracture behavior of ultra-high strength dual-phase steel [J].
Zhao, Zhengzhi ;
Tong, Tingting ;
Liang, Juhua ;
Yin, Hongxiang ;
Zhao, Aimin ;
Tang, Di .
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2014, 618 :182-188
[50]   Mechanical strength, flexural behavior and fracture energy of Recycled Concrete Aggregate self-compacting concrete [J].
Mohammed, Saif, I ;
Najim, Khalid B. .
STRUCTURES, 2020, 23 :34-43