Dynamic recrystallization mechanisms of an Fe-8% Al low density steel under hot rolling conditions

被引：116

作者：

Castan, C. ^{[1
]}

Montheillet, F. ^{[2
]}

Perlade, A. ^{[3
]}

机构：

[1] ArcelorMittal, R&D Packaging, F-57283 Maizieres Les Metz, France

[2] Ecole Mines, Ctr SMS, CNRS UMR 5146, F-42023 St Etienne 2, France

[3] ArcelorMittal, R&D Automot Prod, F-57283 Maizieres Les Metz, France

来源：

SCRIPTA MATERIALIA | 2013年 / 68卷 / 06期

关键词：

Ferritic steels; High-temperature deformation; Dynamic recrystallization; Recrystallized microstructure; Recrystallization texture; DEFORMATION; TEXTURE; METALS;

D O I：

10.1016/j.scriptamat.2012.07.037

中图分类号：

TB3 [工程材料学];

学科分类号：

0805 ; 080502 ;

摘要：

Iron-aluminium alloys display promising physical and mechanical properties. In this study, the effects of strain, strain rate and temperature on an Fe-8% Al were investigated. Hot torsion tests were performed in the temperature range 900-1100 degrees C and strain rate range 0.1-10 s(-1). In this alloy, two types of dynamic recrystallization may operate during hot deformation: at high temperature and high strain rate, this alloy undergoes discontinuous dynamic recrystallization, whereas at lower temperature and strain rate, continuous dynamic recrystallization occurs. (C) 2012 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.

引用

页码：360 / 364

页数：5

共 13 条

[1] Texture development during the torsion testing of alpha-iron and two IF steels [J].

Baczynski, J ;

Jonas, JJ .

ACTA MATERIALIA, 1996, 44 (11) :4273-4288

[2] Physical and mechanical properties of iron-aluminium-(Mn, Si) lightweight steels [J].

Frommeyer, G ;

Drewes, EJ ;

Engl, B .

REVUE DE METALLURGIE-CAHIERS D INFORMATIONS TECHNIQUES, 2000, 97 (10) :1245-1253

[3] DYNAMIC RECRYSTALLIZATION DURING CREEP OF SINGLE-CRYSTALLINE HALITE - EXPERIMENTAL-STUDY [J].

GUILLOPE, M ;

POIRIER, JP .

JOURNAL OF GEOPHYSICAL RESEARCH, 1979, 84 (NB10) :5557-5567

[4] DISLOCATION CELL FORMATION IN METALS [J].

HOLT, DL .

JOURNAL OF APPLIED PHYSICS, 1970, 41 (08) :3197-+

[5] Microstructural refinement of an Fe-C alloy within the ferritic range via two different strain paths [J].

Lim, S. M. ;

El Wahabi, M. ;

Desrayaud, C. ;

Montheillet, E. .

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2007, 460 (532-541) :532-541

[6]

LOMBRY R, 1981, REV METALL-PARIS, V78, P975

[7] 2ND PAPER ON STATISTICS ASSOCIATED WITH THE RANDOM DISORIENTATION OF CUBES [J].

MACKENZIE, JK .

BIOMETRIKA, 1958, 45 (1-2) :229-240

[8] MICROSTRUCTURAL EVOLUTION IN AL DEFORMED TO STRAINS OF 60 AT 400-DEGREES-C [J].

MCQUEEN, HJ ;

KNUSTAD, O ;

RYUM, N ;

SOLBERG, JK .

SCRIPTA METALLURGICA, 1985, 19 (01) :73-78

[9]

Montheillet F, 2004, CISM COUR L, P203

[10]

Murray J.L., 1986, BINARY ALLOY PHASE D, V1

← 1 2 →