Serrated flow in AZ91 magnesium alloy in tension and compression

被引:0
作者
Trojanova, Z. [1 ]
Caceres, C. H. [2 ]
Lukac, P. [1 ]
Cizek, L. [3 ]
机构
[1] Charles Univ Prague, Fac Math & Phys, Dept Phys Mat, CZ-12116 Prague 2, Czech Republic
[2] Univ Queensland, Sch Engn, ARC Ctr Excellence Design Light Met, Brisbane, Qld 4072, Australia
[3] VSB Tech Univ Ostrava, CZ-70800 Ostrava, Czech Republic
来源
KOVOVE MATERIALY-METALLIC MATERIALS | 2008年 / 46卷 / 05期
关键词
serrated yielding; dislocations; solid solution; diffusion; collective motion of dislocations; acoustic emission;
D O I
暂无
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
AZ91 magnesium alloy exhibits jerky flow when deformed a short time after solution heat treatment and quenching. The occurrence of stress drops and discontinuous plastic deformation has been observed at temperatures in the vicinity of ambient temperature in tension as well as compression. The alloy exhibits some degree of negative strain rate sensitivity. Acoustic emission accompanies the stress drops. It is concluded that successive deformation bands propagate along the gauge length as soon as the material develops gross plastic deformation, regardless of the applied strain rate. The results are discussed in terms of current theories for the Portevin-LeChatelier effect.
引用
收藏
页码:249 / 256
页数:8
相关论文
共 53 条
[1]  
Balík J, 2007, KOVOVE MATER, V45, P135
[2]   The onset of Portevin-LeChatelier instabilities in tensile testing [J].
Balík, J .
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2001, 316 (1-2) :102-108
[3]   Inverse critical strains for jerky flow in Al-Mg alloys [J].
Balík, J ;
Lukác, P ;
Kubin, LP .
SCRIPTA MATERIALIA, 2000, 42 (05) :465-471
[4]   EFFECT OF EXTRANEOUS DEFORMATION ON STRAIN HARDENING IN CU SINGLE CRYSTALS [J].
BASINSKI, ZS ;
JACKSON, PJ .
APPLIED PHYSICS LETTERS, 1965, 6 (08) :148-&
[5]  
BOCEK M, 1937, J MAT SCI ENG A, V137, P111
[6]   ACOUSTIC-EMISSION AND DEFORMATION BANDS IN AL-2.5-PERCENT MG AND CU-30-PERCENT ZN [J].
CACERES, CH ;
RODRIGUEZ, AH .
ACTA METALLURGICA, 1987, 35 (12) :2851-2864
[7]   Effects of solidification rate and ageing on the microstructure and mechanical properties of AZ91 alloy [J].
Cáceres, CH ;
Davidson, CJ ;
Griffiths, JR ;
Newton, CL .
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2002, 325 (1-2) :344-355
[8]  
Caceres CH., 2001, J LIGHT MET, V1, P151, DOI [10.1016/S1471-5317(01)00008-6, DOI 10.1016/S1471-5317(01)00008-6]
[9]  
Chaturvedi M., 1972, Metal Science Journal, V6, P16
[10]   ONSET OF SERRATED YIELDING IN MG-10AG ALLOY [J].
CHATURVEDI, MC ;
LLOYD, DJ .
PHILOSOPHICAL MAGAZINE, 1974, 30 (06) :1199-1207