Investigation of liquid LBE embrittlement effects on irradiated ferritic/martensitic steels by slow-strain-rate tensile tests

被引:32
作者
Long, B. [1 ,2 ]
Dai, Y. [1 ]
Baluc, N. [3 ]
机构
[1] Paul Scherrer Inst, CH-5232 Villigen, Switzerland
[2] China Inst Atom Energy, Beijing 102473, Peoples R China
[3] Ecole Polytech Fed Lausanne, Ctr Rech Phys Plasmas, Assoc Euratom Confederat Suisse, CH-1015 Lausanne, Switzerland
关键词
METAL EMBRITTLEMENT; T91; PROTON; MONOCRYSTALS; ACCELERATOR; LISOR;
D O I
10.1016/j.jnucmat.2011.11.036
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
In the present work, LBE (lead-bismuth eutectic) embrittlement effects on ferritic/martensitic (FM) steels have been studied by conducting slow-strain-rate tensile (SSRT) testing on T91 and F82H steels either in Ar or in liquid LBE after irradiation to doses up to about 20 dpa in a mixed spectrum of spallation neutrons and high energy protons. SSRT tests were performed at temperatures in the range of 150-500 degrees C. Tests in Ar revealed significant irradiation-induced hardening and embrittlement effects (loss of ductility) as compared to the unirradiated ones. Tests in LBE showed additional embrittlement effects induced by LBE, which increased with irradiation-induced hardening. As a consequence, the fracture strain of irradiated specimens was reduced to a very low level of about 2-3%. A combination of the model of adsorption-induced reduction in cohesion of atomic bonds and the Kelly-Tyson-Cottrell criterion (sigma/tau >= sigma(max)/tau(max)) for brittle cleavage fracture was used to interpret qualitatively the observation reported in the present paper. (C) 2011 Elsevier B.V. All rights reserved.
引用
收藏
页码:85 / 90
页数:6
相关论文
共 20 条
  • [1] Bin Long, 2009, THESIS ECOLE POLYTEC
  • [2] Tensile properties of ferritic/martensitic steels irradiated in STIP-I
    Dai, Y.
    Long, B.
    Tong, Z. F.
    [J]. JOURNAL OF NUCLEAR MATERIALS, 2008, 377 (01) : 115 - 121
  • [3] Slow strain rate tensile tests on T91 in static lead-bismuth eutectic
    Dai, Y.
    Long, B.
    Groeschel, F.
    [J]. JOURNAL OF NUCLEAR MATERIALS, 2006, 356 (1-3) : 222 - 228
  • [4] Tensile tests and TEM investigations on LiSoR-2 to-4
    Dai, Y.
    Long, B.
    Jia, X.
    Glasbrenner, H.
    Samec, K.
    Groeschel, F.
    [J]. JOURNAL OF NUCLEAR MATERIALS, 2006, 356 (1-3) : 256 - 263
  • [5] Microstructure in Martensitic Steel DIN 1.4926 after 800 MeV proton irradiation
    Dai, Y
    Bauer, GS
    Carsughi, F
    Ullmaier, H
    Maloy, SA
    Sommer, WF
    [J]. JOURNAL OF NUCLEAR MATERIALS, 1999, 265 (1-2) : 203 - 207
  • [6] Dai Y., 2001, J NUCL MATER, V296, P43
  • [7] Materials researches at the Paul Scherrer Institute for developing high power spallation targets
    Dai, Yong
    Wagner, Werner
    [J]. JOURNAL OF NUCLEAR MATERIALS, 2009, 389 (02) : 288 - 296
  • [8] Tensile properties of candidate SNS target container materials after proton and neutron irradiation in the LANSCE accelerator
    Farrell, K
    Byun, TS
    [J]. JOURNAL OF NUCLEAR MATERIALS, 2001, 296 : 129 - 138
  • [9] LiSoR irradiation experiments and preliminary post-irradiation examinations
    Glasbrenner, H
    Dai, Y
    Gröschel, F
    [J]. JOURNAL OF NUCLEAR MATERIALS, 2005, 343 (1-3) : 267 - 274
  • [10] Kamdar M. H., 1973, Progress in Materials Science, V15, P289, DOI 10.1016/0079-6425(73)90005-4