Electrochemical performance of cathodes prepared on current collector with different surface morphologies

被引:30
作者
Nakamura, Tatsuya [1 ]
Okano, Shingo [1 ]
Yaguma, Noriko [2 ]
Morinaga, Yukari [2 ]
Takahara, Hikari [1 ]
Yamada, Yoshihiro [1 ]
机构
[1] Univ Hyogo, Div Elect Mat & Devices, Dept Elect Engn & Comp Sci, Grad Sch Engn, Himeji, Hyogo 6712280, Japan
[2] MEC Co Ltd, Amagasaki, Hyogo 6600832, Japan
关键词
Cathode; Current collector; Potential profile; Complex impedance; LITHIUM-ION BATTERIES; ALUMINUM CORROSION; ELECTROLYTE; INTERFACE;
D O I
10.1016/j.jpowsour.2013.02.021
中图分类号
O64 [物理化学(理论化学)、化学物理学];
学科分类号
070304 ; 081704 ;
摘要
LiCo1/3Ni1/3Mn1/3O2 cathode electrodes were prepared onto Al current collectors with different surface morphologies through usual doctor blade technique. Their electrochemical performances, especially at high current rate, were influenced by the surface morphology of the current collector:. These implied the less polarization for the electrode prepared on the surface roughened current collector. In addition, the AC complex impedance analysis exhibited that the interface resistance between the film electrode and the current collector as well as the interface resistance between the electrode and the electrolyte was reduced in the case of the surface-roughened current collector, but that the Ohmic resistance was enlarged. (C) 2013 Elsevier B.V. All rights reserved.
引用
收藏
页码:532 / 537
页数:6
相关论文
共 20 条
[1]   Studies of cycling behavior, ageing, and interfacial reactions of LiNi0.5Mn1.5O4 and carbon electrodes for lithium-ion 5-V cells [J].
Aurbach, Doron ;
Markovsky, Boris ;
Talyossef, Yosef ;
Salitra, Gregory ;
Kim, Hyeong-Jin ;
Choi, Seungdon .
JOURNAL OF POWER SOURCES, 2006, 162 (02) :780-789
[2]   Review on electrode-electrolyte solution interactions, related to cathode materials for Li-ion batteries [J].
Aurbach, Doron ;
Markovsky, Boris ;
Salitra, Gregory ;
Markevich, Elena ;
Talyossef, Yossi ;
Koltypin, Maxim ;
Nazar, Linda ;
Ellis, Brian ;
Kovacheva, Daniella .
JOURNAL OF POWER SOURCES, 2007, 165 (02) :491-499
[3]  
Chen ZP, 2011, NAT MATER, V10, P424, DOI [10.1038/NMAT3001, 10.1038/nmat3001]
[4]   Ohmic Drop in LiFePO4 Based Lithium Battery Cathodes Containing Agglomerates [J].
Cornut, R. ;
Lepage, D. ;
Schougaard, S. B. .
JOURNAL OF THE ELECTROCHEMICAL SOCIETY, 2012, 159 (06) :A822-A827
[5]   Hierarchically Porous Monolithic LiFePO4/Carbon Composite Electrode Materials for High Power Lithium Ion Batteries [J].
Doherty, Cara M. ;
Caruso, Rachel A. ;
Smarsly, Bernd M. ;
Adelhelm, Philipp ;
Drummond, Calum J. .
CHEMISTRY OF MATERIALS, 2009, 21 (21) :5300-5306
[6]   The role of carbon black distribution in cathodes for Li ion batteries [J].
Dominko, R ;
Gaberscek, M ;
Drofenik, J ;
Bele, M ;
Pejovnik, S ;
Jamnik, J .
JOURNAL OF POWER SOURCES, 2003, 119 :770-773
[7]   A novel coating technology for preparation of cathodes in Li-ion batteries [J].
Dominko, R ;
Gaberscek, M ;
Drofenik, J ;
Bele, M ;
Pejovnik, S .
ELECTROCHEMICAL AND SOLID STATE LETTERS, 2001, 4 (11) :A187-A190
[8]   The cathode-electrolyte interface in the Li-ion battery [J].
Edström, K ;
Gustafsson, T ;
Thomas, JO .
ELECTROCHIMICA ACTA, 2004, 50 (2-3) :397-403
[9]   Influence of temperature on the interface chemistry of LixMn2O4 electrodes [J].
Eriksson, T ;
Andersson, AM ;
Gejke, C ;
Gustafsson, T ;
Thomas, JO .
LANGMUIR, 2002, 18 (09) :3609-3619
[10]   Corrosion of aluminum current collectors in high-power lithium-ion batteries for use in hybrid electric vehicles [J].
Hyams, Tzipi Cohen ;
Go, John ;
Devine, Thomas M. .
JOURNAL OF THE ELECTROCHEMICAL SOCIETY, 2007, 154 (08) :C390-C396