Air and wet air oxidation of 9Cr-3Co-3W creep resistant ferritic steel at 650 °C

被引:0
作者
Tang, S. [1 ]
Tang, X. [1 ]
Xiang, Z. D. [1 ]
机构
[1] Wuhan Univ Sci & Technol, Sch Met & Mat, Wuhan 430081, Peoples R China
来源
ADVANCES IN CHEMICAL, MATERIAL AND METALLURGICAL ENGINEERING, PTS 1-5 | 2013年 / 634-638卷
关键词
Ferritic steel; Oxidation; Scale growth kinetics; High temperature corrosion; Z-PHASE-FORMATION; MARTENSITIC STEELS; WATER;
D O I
10.4028/www.scientific.net/AMR.634-638.1685
中图分类号
TQ [化学工业];
学科分类号
0817 ;
摘要
The new experimental creep resistant ferritic steel of the 9Cr-3Co-3W type was oxidised at 650 degrees C in air and wet air. The oxidation kinetics was measured by intermittent weight measurement. The scales formed were analysed using techniques of XRD, SEM and EDS. The results showed that the oxidation rate was more than a magnitude faster in wet air than in air. The oxidation kinetics in air obeyed the parabolic rate law of oxidation only in a limited oxidation period of up to 1726 h whereas it did not follow any power rate law of oxidation in wet air. The steel cannot form a protective Cr2O3 scale either in air or in wet air at 650 degrees C. Instead, the scale formed in air consisted of an outer (Fe0.6Cr0.4)(2)O-3 layer and an inner Cr-rich (Fe,Cr)(2)O-3 layer containing Cr2O3 particles, but in wet air it consisted of an outer Fe3O4 layer and an inner (Fe,Cr)(3)O-4 layer.
引用
收藏
页码:1685 / 1689
页数:5
相关论文
共 16 条
  • [11] The Z-phase in 9-12% Cr ferritic steels: A phase stability analysis
    Kocer, Cenk
    Abe, Taichi
    Soon, Aloysius
    [J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2009, 505 (1-2): : 1 - 5
  • [12] Strang A, 1996, MATER SCI TECH SER, V12, P552, DOI 10.1179/026708396790165993
  • [13] Creep-strengthening of steel at high temperatures using nano-sized carbonitride dispersions
    Taneike, M
    Abe, F
    Sawada, K
    [J]. NATURE, 2003, 424 (6946) : 294 - 296
  • [14] A chromia forming thermal barrier coating system
    Taylor, M. P.
    Evans, H. E.
    Gray, S.
    Nicholls, J. R.
    [J]. MATERIALS AND CORROSION-WERKSTOFFE UND KORROSION, 2011, 62 (07): : 668 - 673
  • [15] Materials for ultrasupercritical coal power plants-boiler materials: Part 1
    Viswanathan, R
    Bakker, W
    [J]. JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2001, 10 (01) : 81 - 95
  • [16] Microstructure and creep rupture characteristics of an ultra-low carbon ferritic/martensitic heat-resistant steel
    Yin, Feng-shi
    Jung, Woo-sang
    Chung, Soon-hyo
    [J]. SCRIPTA MATERIALIA, 2007, 57 (06) : 469 - 472