Modeling dynamic brittle behavior of materials with circular flaws or pores

Compressive failure of brittle materials is driven primarily by crack growth from pre-existing flaws in the material. These flaws, such as grain boundaries, pores, preexisting cracks, inclusions and missing grains, are randomly spaced and have a range of possible shapes and sizes. The current work proposes a micromechanics-based model for compressive dynamic failure of brittle materials with circular pore flaws, which incorporates both the number density and the size distribution of flaws. Results show that the distribution of flaw sizes is very important, particularly at moderate strain rate, since analyses based solely on the mean flaw size overpredict strength. Therefore, in order to increase dynamic strength at low to moderate strain rates, it is most effective to control the presence of large flaws. At very high strain rates, however, crack growth is activated even in small flaws and therefore controlling the total number density rather than the size of the flaws is effective for increasing dynamic strength. Finally, the model shows that neglecting very small flaws in the pore population may not have significant effects on the results in many cases, suggesting that the model is a useful tool for identifying a minimum resolution required for experimental characterization of microstructure. (C) 2013 Elsevier Ltd. All rights reserved.