Turning performance of Al 7075/SiCp MMC and multi-response optimization using WPCA and Taguchi approach

被引：7

作者：

Das, Diptikanta ^{[1
]}

Chakraborty, Vivek ^{[1
]}

Nanda, Basanta Kumar ^{[1
]}

Routara, Bharat Chandra ^{[1
]}

机构：

[1] KIIT Univ, Sch Mech Engn, Bhubaneswar 751024, Orissa, India

来源：

MATERIALS TODAY-PROCEEDINGS | 2018年 / 5卷 / 02期

关键词：

Metal matrix composite; Turning; WPCA; Taguchi; ANOVA; METAL-MATRIX COMPOSITES; SURFACE-ROUGHNESS; TOOL WEAR; PARAMETERS;

D O I：

10.1016/j.matpr.2017.12.207

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

Silicon carbide particulate (SiCp) reinforced Al 7075 metal matrix composite (MMC) was synthesized through stir casting and heat treated to T6 condition. Influence of machining process parameters on average roughness (Ra) of the machined surfaces and material removal rate (M) was investigated during turning in dry condition. Results revealed that Ra reduced either on increasing spindle speed or on reducing feed; but cutting depth was not influential on Ra. M increased on increasing either of the three parameters. Moreover, weighted principal component analysis (WPCA) along with Taguchi technique was used for the multiresponse optimization of the process parameters. (c) 2017 Elsevier Ltd. All rights reserved.

引用

页码：6030 / 6037

页数：8

共 14 条

[1]

Chandrasekaran M., 2014, 5 INT 26 ALL IND MAN

[2] Evaluation of tool wear when machining SiCp-reinforced Al-2014 alloy matrix composites [J].

Ciftci, I ;

Turker, M ;

Seker, U .

MATERIALS & DESIGN, 2004, 25 (03) :251-255

[3]

Das D K., 2016, Manag. Sci. Lett, V6, P297, DOI [10.5267/j.msl.2016.1.011, DOI 10.5267/J.MSL.2016.1.011]

[4] Diamond tool performance in machining metal-matrix composites [J].

Davim, JP .

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2002, 128 (1-3) :100-105

[5] Machining of aluminium metal matrix composites with Electrical discharge machining - A Review [J].

Kandpal, Bhaskar Chandra ;

Kumar, Jatinder ;

Singh, Hari .

MATERIALS TODAY-PROCEEDINGS, 2015, 2 (4-5) :1665-1671

[6] Study of tool wear and surface roughness in machining of homogenised SiC-p reinforced aluminium metal matrix composite [J].

Kiliçkap, E ;

Çakir, O ;

Aksoy, M ;

Inan, A .

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2005, 164 :862-867

[7] Advanced Aluminium Matrix Composites: The Critical Need of Automotive and Aerospace Engineering Fields [J].

Koli, Dinesh Kumar ;

Agnihotri, Geeta ;

Purohit, Rajesh .

MATERIALS TODAY-PROCEEDINGS, 2015, 2 (4-5) :3032-3041

[8] Effect of machining parameters on cutting force and surface roughness of in situ Al-4.5%Cu/TiC metal matrix composites [J].

Kumar, Anand ;

Mahapatra, M. M. ;

Jha, P. K. .

MEASUREMENT, 2014, 48 :325-332

[9]

Mishra P.C., 2015, Int. J. Ind. Eng. Comput, V6, P445, DOI DOI 10.5267/J.IJIEC.2015.6.002

[10]

Radhika N., 2014, E3 J SCI RES, V2, P009

← 1 2 →