Reuse of mining waste as aggregates in fly ash-based geopolymers

被引:88
作者
Capasso, I. [1 ]
Lirer, S. [2 ]
Flora, A. [3 ]
Ferone, C. [4 ]
Cioffi, R. [4 ]
Caputo, D. [5 ]
Liguori, B. [5 ]
机构
[1] CNR, Construct Technol Inst, Milan, Italy
[2] Univ Guglielmo Marconi, Fac Sci & Appl Technol, Rome, Italy
[3] Univ Naples Federico II, Dept Civil Architectural & Environm Engn, Naples, Italy
[4] Univ Parthenope, Dept Engn, Naples, Italy
[5] Univ Naples Federico II, Appl Chem Labs, Dept Chem Mat & Ind Engn, Naples, Italy
关键词
Mining waste; Fly ashes; Geopolymer composites; MINE TAILINGS; ACID; SUSTAINABILITY; SEDIMENTS; STATE;
D O I
10.1016/j.jclepro.2019.02.164
中图分类号
X [环境科学、安全科学];
学科分类号
08 ; 0830 ;
摘要
Mineral production continues to be necessary for economic development, consequently also the management of mining and mineral-processing wastes represent a considerable issue in terms of recycling and economic strategies for the future. One of the most promising reuses for coarse-grained mining wastes, especially barren waste rocks from coal and metal mining, is their application in the building and construction sector. An experimental research has been developed with the aim of studying the possible reuse of waste rocks - coming from mining activities-as fine aggregates in a fly ash based geopolymer: physical, chemical and mechanical tests have been carried out in order to analyze in detail the interaction between the geopolymer binder and the rock waste aggregates. All the mixtures, characterized by an aggregate/binder/ratio ranging between 0.05 and 1, showed a final microstructure characterized by a rather homogeneous geopolymer matrix embedding the mining waste rock. The geopolymeric matrix governs the overall mechanical behavior of the system, thanks also to the strong interaction at the interface between matrix and aggregates (mining waste). Moreover, all the geocomposites satisfy the prescribed limit for inert or non-hazardous waste. (C) 2019 Elsevier Ltd. All rights reserved.
引用
收藏
页码:65 / 73
页数:9
相关论文
共 42 条
[1]  
[Anonymous], 2003, 1729402003 ISO
[2]  
[Anonymous], 124572 UNI EN
[3]   Management and valorisation of wastes through use in producing alkali-activated cement materials [J].
Bernal, Susan A. ;
Rodriguez, Erich D. ;
Kirchheim, Ana Paula ;
Provis, John L. .
JOURNAL OF CHEMICAL TECHNOLOGY AND BIOTECHNOLOGY, 2016, 91 (09) :2365-2388
[4]   Evaluation of mechanical and leaching properties of cement-based solidified materials encapsulating Cd-exchanged natural zeolites [J].
Cioffi, R ;
Pansini, M ;
Caputo, D ;
Colella, C .
ENVIRONMENTAL TECHNOLOGY, 1996, 17 (11) :1215-1224
[5]   Thermal cycling stability of fly ash based geopolymer mortars [J].
Colangelo, F. ;
Cioffi, R. ;
Roviello, G. ;
Capasso, I. ;
Caputo, D. ;
Aprea, P. ;
Liguori, B. ;
Ferone, C. .
COMPOSITES PART B-ENGINEERING, 2017, 129 :11-17
[6]   Pre-packed alkali activated cement-free mortars for repair of existing masonry buildings and concrete structures [J].
Coppola, L. ;
Coffetti, D. ;
Crotti, E. .
CONSTRUCTION AND BUILDING MATERIALS, 2018, 173 :111-117
[7]   Use of tartaric acid for the production of sustainable Portland-free CSA-based mortars [J].
Coppola, L. ;
Coffetti, D. ;
Crotti, E. .
CONSTRUCTION AND BUILDING MATERIALS, 2018, 171 :243-249
[8]   Plain and Ultrafine Fly Ashes Mortars for Environmentally Friendly Construction Materials [J].
Coppola, Luigi ;
Coffetti, Denny ;
Crotti, Elena .
SUSTAINABILITY, 2018, 10 (03)
[9]  
Davidovits J., 1993, CERAMIC T VOL 37, V37, P165
[10]  
Davidovits J., 2011, GEOPOLYMER CHEM APPL, P70