Proposal of the concept of splice-type arrester for foam core sandwich panels

被引：14

作者：

Hirose, Yasuo ^{[1
]}

Matsuda, Hirokazu ^{[2
]}

Matsubara, Go ^{[2
]}

Hojo, Masaki ^{[3
]}

Inamura, Fumihide ^{[2
]}

机构：

[1] Kanazawa Inst Technol, Coll Engn, Dept Aeronaut, Nonoichi, Ishikawa 9218501, Japan

[2] Kawasaki Heavy Ind Co Ltd, Strength Res Dept, Tech Inst, Akashi, Hyogo 6738666, Japan

[3] Kyoto Univ, Dept Mech Engn & Sci, Sakyo Ku, Kyoto 6068501, Japan

来源：

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING | 2012年 / 43卷 / 08期

关键词：

Foams; Damage tolerance; Delamination; Finite element analysis (FE); FATIGUE-CRACK GROWTH; PEEL-STOPPER; INTERFACIAL FRACTURE; COMPOSITE; STRENGTH; BEAMS; SUPPRESSION; PERFORMANCE; DEFLECTION; KINKING;

D O I：

10.1016/j.compositesa.2012.03.022

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

A new type of crack arrester concept, named the splice-type crack arrester, was invented and applied to a core-core splice in a foam core sandwich panel in order to suppress interfacial crack growth. An analytical evaluation of this crack arrester including parametric studies was carried out. It was confirmed by finite element (FE) analysis that interfacial crack propagation was suppressed by a decrease in the energy release rate at the crack tip under constant loading owing to the splice-type crack arrester as the crack tip approached the edge of the arrester. Through this study, it was revealed that the leading edge of the splice-type crack arrester, its shape and material, have strong effects on the crack suppression capability. (C) 2012 Elsevier Ltd. All rights reserved.

引用

页码：1318 / 1325

页数：8

共 50 条

[21] On low-velocity impact response of foam-core sandwich panels
Huo, Xintao
Liu, Hao
Luo, Quantian
Sun, Guangyong
Li, Qing
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, 2020, 181
[22] Deformation and perforation of sandwich panels with aluminum-foam core at elevated temperatures
Li, Zhibin
Zheng, Zhijun
Yu, Jilin
Lu, Fangyun
INTERNATIONAL JOURNAL OF IMPACT ENGINEERING, 2017, 109 : 366 - 377
[23] Indentation of metallic foam core sandwich panels with soft aluminium face sheets
Vodenitcharova, Tania
Kabir, Kaveh
Hoffman, Mark
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2012, 558 : 175 - 185
[24] Design Guidelines for FRP-Faced Foam Core Sandwich Panels: Review and Building Code Compliance
Kassab, Raghad
Sadeghian, Pedram
JOURNAL OF ARCHITECTURAL ENGINEERING, 2025, 31 (02)
[25] Influence of core density, core thickness, and rigid inserts on dynamic characteristics of sandwich panels with polyurethane foam as core
Sharma, Ramesh S.
Raghupathy, V. P.
JOURNAL OF REINFORCED PLASTICS AND COMPOSITES, 2010, 29 (21) : 3226 - 3236
[26] Experimental Investigations on Bending Collapse Modes of Innovative Sandwich Panels with Metallic Foam Core
Formisano, Antonio
Viscusi, Antonio
Durante, Massimo
Carrino, Luigi
De Fazio, Dario
Langella, Antonio
23RD INTERNATIONAL CONFERENCE ON MATERIAL FORMING, 2020, 47 : 749 - 755
[27] Memorization and detection of an arrested crack in a foam-core sandwich structure using a crack arrester with embedded metal wires and FBG sensors
Minakuchi, Shu
Takeda, Nobuo
Yamauchi, Ippei
Hirose, Yasuo
SMART SENSOR PHENOMENA, TECHNOLOGY, NETWORKS, AND SYSTEMS 2011, 2011, 7982
[28] Enhanced microwave absorption of sandwich panels with magnetized carbon fiber corrugated array reinforced PMI foam core
Zhang, Zhuqing
Wu, Haihong
Jiang, Lin
Zhang, Juntao
Li, Jiquan
Geng, Tie
JOURNAL OF APPLIED POLYMER SCIENCE, 2025, 142 (04)
[29] Structural behavior of load-bearing sandwich wall panels with GFRP skin and a foam-web core
Wang, Lu
Wu, Zhimin
Liu, Weiqing
Wan, Li
SCIENCE AND ENGINEERING OF COMPOSITE MATERIALS, 2018, 25 (01) : 173 - 188
[30] Experimental investigation on the performance of PVC foam core sandwich panels under air blast loading
Zhou, Tianyu
Zhang, Pan
Xiao, Wei
Liu, Jun
Cheng, Yuansheng
COMPOSITE STRUCTURES, 2019, 226

← 1 2 3 4 5 →