Fabrication and Characterization of E-Glass Fiber Reinforced Unsaturated Polyester Resin Based Composite Materials

被引：15

作者：

Islam, Md. Naimul ^{[1
]}

Harun-Ar-Rashid ^{[1
,2
]}

Islam, Farhana ^{[1
]}

Karmaker, Nanda ^{[1
]}

Koly, Farjana A. ^{[1
]}

Mahmud, Jumana ^{[1
]}

Keya, Kamrun N. ^{[1
]}

Khan, Ruhul A. ^{[1
]}

机构：

[1] Bangladesh Atom Energy Commiss, Inst Radiat & Polymer Technol, Polymer Composite Lab, Dhaka 1000, Bangladesh

[2] Mil Inst Sci & Technol, Dept Nucl Sci & Engn, Dhaka, Bangladesh

来源：

NANO HYBRIDS AND COMPOSITES | 2019年 / 24卷

关键词：

Unsaturated Polyester Resin; Mechanical Properties; E-glass Fibers; Composites; Polymer; MECHANICAL-PROPERTIES; POLYMER COMPOSITES; BLENDS;

D O I：

10.4028/www.scientific.net/NHC.24.1

中图分类号：

TB3 [工程材料学];

学科分类号：

0805 ; 080502 ;

摘要：

E-glass fiber mat reinforced Unsaturated Polyester Resin (UPR)-based composites were fabricated by conventional hand lay-up technique. The fiber content was varied from 5 to 50% by weight. Mechanical properties (tensile and bending) of the fabricated composites were investigated. Tensile Strength (TS) of the 5% and 50% fiber reinforced composites was 32 MPa and 72 MPa respectively. Similarly, Tensile Modulus (TM), Elongation at break (Eb), Bending Strength (BS), Bending Modulus (BM), and Impact Strength (IS) of the composites were increased by the increase of fiber loading. Interfacial properties of the composites were investigated by Scanning Electron Microscopy (SEM) and the results revealed that the interfacial bond between fiber and matrix was excellent.

引用

页码：1 / 7

页数：7

共 22 条

[21] The mechanical performance of hybrid phenol-formaldehyde-based composites reinforced with glass and oil palm fibres
Sreekala, MS
George, J
Kumaran, MG
Thomas, S
[J]. COMPOSITES SCIENCE AND TECHNOLOGY, 2002, 62 (03) : 339 - 353
[22] Polymer blends and composites from renewable resources
Yu, Long
Dean, Katherine
Li, Lin
[J]. PROGRESS IN POLYMER SCIENCE, 2006, 31 (06) : 576 - 602

← 1 2 3 →