Multichannel Medium Access Control for Dedicated Short-Range Communications

被引:42
作者
Mak, Tony K. [1 ]
Laberteaux, Kenneth P. [3 ]
Sengupta, Raja [1 ]
Ergen, Mustafa [2 ]
机构
[1] Univ Calif Berkeley, Dept Civil & Environm Engn, Berkeley, CA 94720 USA
[2] Univ Calif Berkeley, Dept Elect Engn & Comp Sci, Berkeley, CA 94720 USA
[3] Toyota Tech Ctr, Ann Arbor, MI 48105 USA
关键词
Dedicated short-range communication (DSRC); distributed coordination function (DCF); IEEE; 802.11; point coordination function (PCF); vehicular communication; wireless access in vehicular environments (WAVE); wireless local area network (LAN);
D O I
10.1109/TVT.2008.921625
中图分类号
TM [电工技术]; TN [电子技术、通信技术];
学科分类号
0808 ; 0809 ;
摘要
This paper describes a medium access control (MAC) protocol to enable multichannel operation for dedicated short-range communications (DSRCs). In particular, we focus on the challenge of supporting potentially high-bandwidth commercial or infotainment communications between vehicles and the roadside in hotspots over several service channels, while concurrently enabling time-critical vehicle-vehicle communications for safety in a separate channel. In our architecture, within hotspots, the communication is aided by one of the access points in the hotspot. This access point is designated as the coordinating access point (CAP). Outside the hotspots, the communication is for safety only and is conducted in an ad hoc fashion. The CAP protocol design leverages IEEE 802.11 point coordination function (PCF) and distributed coordination function (DCF), which are modified for multichannel operation. The design objective is to maximize the utilization of the service channel that is used for nonsafety communications while meeting the quality-of-service (QoS) constraints of the safety communications. The performance of the IEEE 802.11 DCF and PCF and the CAP extension is quantified by simulation in NS-2. The mobility model represents a four-lane freeway at maximum vehicular traffic flow that is derived from the SHIFT traffic simulator. The CAP design is shown to significantly enhance the performance of safety and nonsafety communications.
引用
收藏
页码:349 / 366
页数:18
相关论文
共 37 条
  • [11] *DTFH, 2005, DTFH6101X001
  • [12] An empirically based path loss model for wireless channels in suburban environments
    Erceg, V
    Greenstein, LJ
    Tjandra, SY
    Parkoff, SR
    Gupta, A
    Kulic, B
    Julius, AA
    Bianchi, R
    [J]. IEEE JOURNAL ON SELECTED AREAS IN COMMUNICATIONS, 1999, 17 (07) : 1205 - 1211
  • [13] WTRP - Wireless token ring protocol
    Ergen, M
    Lee, D
    Sengupta, R
    Varaiya, P
    [J]. IEEE TRANSACTIONS ON VEHICULAR TECHNOLOGY, 2004, 53 (06) : 1863 - 1881
  • [14] Goldsmith, 2004, WIRELESS COMMUNICATI
  • [15] A feedback-based power control algorithm design for VANET
    Guan, Xu
    Sengupta, Raja
    Krishnan, Hariharan
    Bai, Fan
    [J]. 2007 MOBILE NETWORKING FOR VEHICULAR ENVIRONMENTS, 2007, : 67 - +
  • [16] An integrated CMOS RF synthesizer for 802.11a wireless LAN
    Herzel, F
    Fischer, G
    Gustat, H
    [J]. IEEE JOURNAL OF SOLID-STATE CIRCUITS, 2003, 38 (10) : 1767 - 1770
  • [17] HUNG WC, 2002, P 21 BIENN S COMM KI, P31
  • [18] A multichannel CSMA MAC protocol with receiver-based channel selection for multihop wireless networks
    Jain, N
    Das, SR
    Nasipuri, A
    [J]. TENTH INTERNATIONAL CONFERENCE ON COMPUTER COMMUNICATIONS AND NETWORKS, PROCEEDINGS, 2001, : 432 - 439
  • [19] Lee W.C. Y., 1993, Mobile Communications Design Fundamentals, V2nd, DOI DOI 10.1002/9780470930427
  • [20] LINDGREN A, 80211 IEEE PCF