Effects of steam environment on compressive creep behavior of Nextel™720/Alumina ceramic composite at 1200°C

The compressive creep behavior of all oxide-oxide ceramic-matrix composite (CMC) was investigated at 1200 degrees C in laboratory air and in steam. The composite consists of a Porous alumina matrix reinforced with laminated, woven mullite/alumina (Nextel (TM) 720) fibers, has no interface between the fiber and matrix, and relies oil the porous-matrix for flaw tolerance. The compressive stress-strain behavior was investigated and the compressive properties measured. The influence of the loading rate oil compressive stress-strain response and on compressive properties was also explored. A change in loading rate by four orders or magnitude had a profound effect on compressive properties in air and especially in steam. Compressive creep behavior was examined for creep stresses ill the -40 to -100 MPa range. Minimum creep rate was reached in all tests. In air, compressive creep strain magnitudes remained <0.4% and compressive creep strain rates approached -3.5 x 10(-7) s(-1). Creep run-out defined as 100 It at creep stress was achieved in all tests conducted in air. The presence of steam accelerated creep rates and significantly reduced creep lifetimes. In steam, compressive creep strains approached 1.6%, and compressive creep strain rates, -1.9 x 10(-2) s(-1) . In steam, maximum time to rupture was only 3.9 h. Composite microstructure, as well as damage and failure mechanisms were investigated. Published by Elsevier Ltd.