The microstructures and mechanical properties of friction stir welded AZ31 with CaO Mg alloys

被引：11
|
作者：
Choi, Don-Hyun [1 ]
Kim, Shae-Kwang [2 ]
Jung, Seung-Boo [1 ]
机构：
[1] Sungkyunkwan Univ, Sch Adv Mat Sci & Engn, Gyeonggi Do 440746, South Korea
[2] Korea Inst Ind Technol, Inchon 406840, South Korea
来源：
JOURNAL OF ALLOYS AND COMPOUNDS | 2013年 / 554卷
关键词：
Friction stir welding; AZ31; CaO; Hardness; Thermal stability; MAGNESIUM; TEMPERATURE;
D O I：
10.1016/j.jallcom.2012.11.143
中图分类号：
O64 [物理化学（理论化学）、化学物理学];
学科分类号：
070304 ; 081704 ;
摘要：
The present study was carried out to evaluate the microstructural and mechanical properties of a friction stir welded AZ31 with CaO Mg alloys. Friction stir welding (FSW) was performed at a tool rotation speed of 1600 rpm and a traveling speed of 80 mm/min. An intermetallic compound, Al2Ca, was resulted in the base metal (BM). In the stir zone (SZ), fine grains and intermetallic compound particles formed due to dynamic recrystallization and mechanical stirring. Hardness profiling showed that the SZ was harder than the BM, likely due to the presence of fine grains and thermally stable intermetallic compounds. Published by Elsevier B.V.
引用
收藏
页码：162 / 168
页数：7
相关论文
共 50 条
  • [21] Mechanical properties of friction stir welded AZ31 magnesium alloy thick plate joint
    Katoh K.
    Haruyamaand E.
    Tokisue H.
    Keikinzoku Yosetsu/Journal of Light Metal Welding, 2019, 57 (11): : 451 - 460
  • [22] Improving the mechanical properties of a friction stir welded AZ31 joint by adjusting the microstructure and texture
    Sun, Qi
    Fu, Xuesong
    Chen, Guoqing
    Dong, Honggang
    Zhou, Wenlong
    JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2022, 21 : 2326 - 2337
  • [23] Effect of weld conditions on microstructures and mechanical properties of friction stir welded joints on AZ31B magnesium alloys
    Fu, R. D.
    Ji, H. S.
    Li, Y. J.
    Liu, L.
    SCIENCE AND TECHNOLOGY OF WELDING AND JOINING, 2012, 17 (03) : 174 - 179
  • [24] Experimental investigations on the effect of tool rotational speed on mechanical properties and microstructure of friction stir welded AZ31 Mg alloy
    Sucharitha, M.
    Sankar, B. Ravi
    Umamaheswarrao, P.
    MATERIALS TODAY-PROCEEDINGS, 2021, 46 : 3455 - 3459
  • [25] Friction stir welding of dissimilar formed Mg alloys (AZ31/AZ91)
    Lee, CY
    Lee, WB
    Yeon, YM
    Jung, SB
    ECO-MATERIALS PROCESSING & DESIGN VI, 2005, 486-487 : 249 - 252
  • [26] Effects of Friction Stir Processing on Mechanical Properties and Damping Capacities of AZ31 Magnesium Alloys
    Lan, F. Y.
    Chen, H. M.
    Guo, W. P.
    Zhang, J.
    Jin, Y. X.
    INTERNATIONAL CONFERENCE ON MATERIALS SCIENCES AND NANOMATERIALS, 2017, 230
  • [27] Microstructures of friction welded joints of AZ31 to AM60 magnesium alloys
    Fukumoto, S
    Ono, T
    Tanaka, S
    Tsubakino, H
    Tomita, T
    Aritoshi, M
    Okita, K
    MAGNESIUM ALLOYS 2003, PTS 1 AND 2, 2003, 419-4 : 399 - 404
  • [28] Microstructure and mechanical performance of friction stir welded joints of AZ31 magnesium alloy
    Yan, JC
    Xu, ZW
    Li, ZY
    Li, L
    TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, 2005, 15 : 21 - 24
  • [29] Mechanical properties of friction welded joints of AZ31 magnesium alloy
    Katoh, K
    Asahina, T
    Tokisue, H
    PROCEEDINGS OF THE SEVENTH (1997) INTERNATIONAL OFFSHORE AND POLAR ENGINEERING CONFERENCE, VOL IV, 1997, 1997, : 37 - 43
  • [30] Microstructure and Mechanical Properties of AZ31/SiC and AZ31/CNT Composites Produced by Friction Stir Processing
    Nia, A. Alavi
    Nourbakhsh, S. H.
    TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, 2016, 69 (07) : 1435 - 1442
12345