Drilling of Borosilicate Glass with Feedback Control Based on Cutting Force

被引：4

作者：

Ohzeki, Hiro ^{[1
]}

Arai, Fumihito ^{[2
,3
]}

机构：

[1] Kistler Japan Co Ltd, Ind Div, Minato Ku, 3-20-20 Kaigan, Tokyo 1080022, Japan

[2] Nagoya Univ, Dept Mech Sci & Engn, Chikusa Ku, Nagoya, Aichi 4648601, Japan

[3] Seoul Natl Univ, Seoul, South Korea

来源：

ADVANCES IN ABRASIVE TECHNOLOGY XIV | 2011年 / 325卷

关键词：

drilling; feedback control; cutting force; glass; defect-free machining;

D O I：

10.4028/www.scientific.net/AMR.325.442

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

This paper deals with drilling of borosilicate glass with feedback control based on cutting force, in order to provide a basis for defect-free machining of through-holes on borosilicate-glass plates. In this work a machining system which can be operated at a predetermined cutting force by changing the feed rate based on cutting force measured by a piezoelectric type of cutting dynamometer was developed. Subsequently, drilling tests of borosilicate glass was carried out with the developed system. Based on the results of the drilling tests, It has been confirmed that feedback control based on cutting force has the possibility of defect-free drilling of borosilicate-glass plate under specific conditions.

引用

页码：442 / +

页数：2

共 6 条

[1]

ALTINTAS Y, 1992, J ENG IND-T ASME, V114, P386

[2] Thermal and mechanical characterization of borosilicate glass [J].

Bouras, N. ;

Madjoubi, M. A. ;

Kolli, M. ;

Benterki, S. ;

Hamidouche, M. .

PROCEEDINGS OF THE JMSM 2008 CONFERENCE, 2009, 2 (03) :1135-1140

[3] Curvature changing or flattening of anodically bonded silicon and borosilicate glass [J].

Harz, M ;

Engelke, H .

SENSORS AND ACTUATORS A-PHYSICAL, 1996, 55 (2-3) :201-209

[4]

Mizobuchi Akira, 2011, Journal of the Japan Society of Precision Engineering, V77, P296, DOI 10.2493/jjspe.77.296

[5]

Ohzeki H., 2010, P 4 CIRP INT C HIGH, V1, P85

[6] Prevention of exit crack in mirco drilling of soda-lime glass [J].

Park, BJ ;

Choi, YJ ;

Chu, CN .

CIRP ANNALS-MANUFACTURING TECHNOLOGY, 2002, 51 (01) :347-350

← 1 →