On the effect of a general residual stress state on indentation and hardness testing

被引：143

作者：

Huber, N. ^{[1
]}

Heerens, J. ^{[1
]}

机构：

[1] GKSS Forschungszentrum Geesthacht GmbH, Inst Mat Res Mat Mech, D-21502 Geesthacht, Germany

来源：

ACTA MATERIALIA | 2008年 / 56卷 / 20期

关键词：

Hardness test; Nanoindentation; Residual stresses; Yield phenomena; Analytical methods;

D O I：

10.1016/j.actamat.2008.08.029

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

During indentation experiments, residual stresses are superimposed on the applied indentation stress field and influence the measurement of the volume of interest. The residual stress state call vary in magnitude and biaxiality, and the resultant error in the measured hardness is difficult to estimate. A prediction of the effect ill the contact pressure with and without residual stresses is carried out by a flew model that accounts for nonlinearities caused by the von Mises' flow rule. The model can also be used for the correction of the effect of a general residual stress state on any further analysis of mechanical properties and stress-strain behaviour from the Measured indentation data. The model provides ail estimation of the measurement uncertainty when the stress ratio or the strength of the material is unknown a situation that is a commonly encountered with hardness testing of thin films and welded materials. (C) 2008 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.

引用

页码：6205 / 6213

页数：9

共 27 条

[1] A new modified expanding cavity model for characterizing the spherical indentation behaviour of bulk metallic glass with pile-up [J].

Ai, K. ;

Dai, L. H. .

SCRIPTA MATERIALIA, 2007, 56 (09) :761-764

[2]

AMANCIO S, 2008, J MATER PROCESS TECH, DOI DOI 10.1016/J.JMATPROTEC.2007.12.00

[3] Analysis of residual stress in laser welded aerospace aluminium T-joints by neutron diffraction and finite element modelling [J].

Bayraktar, F. S. ;

Staron, P. ;

Kocak, M. ;

Schreyer, A. .

STRESS EVALUATION IN MATERIALS USING NEUTRONS AND SYNCHROTRON RADIATION, 2008, 571-572 :355-360

[4] Indentation and imprint mapping method for identification of residual stresses [J].

Bocciarelli, M. ;

Maier, G. .

COMPUTATIONAL MATERIALS SCIENCE, 2007, 39 (02) :381-392

[5]

BOLAHSKOV A, 1996, J MATER RES, V11, P760

[6] On the determination of residual stress and strain fields by sharp indentation testing. Part II: Experimental investigation [J].

Carlsson, S ;

Larsson, PL .

ACTA MATERIALIA, 2001, 49 (12) :2193-2203

[7] On the determination of residual stress and strain fields by sharp indentation testing. Part I: Theoretical and numerical analysis [J].

Carlsson, S ;

Larsson, PL .

ACTA MATERIALIA, 2001, 49 (12) :2179-2191

[8] Development of semi-empirical formulation for extracting materials properties from nanoindentation measurements: Residual stresses, substrate effect, and creep [J].

Chen, Kuo-Shen ;

Chen, Tuo-Cheng ;

Ou, Kuang-Shun .

THIN SOLID FILMS, 2008, 516 (08) :1931-1940

[9] On the determination of residual stress and mechanical properties by indentation [J].

Chen, X ;

Yan, J ;

Karlsson, AM .

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2006, 416 (1-2) :139-149

[10]

HEERENS J, J MAT RES UNPUB

← 1 2 3 →