Effect of ZrB2 particles on the microstructure and mechanical properties of hybrid (ZrB2 + Al3Zr)/AA5052 insitu composites

被引:89
|
作者
Gautam, Gaurav
Mohan, Anita
机构
[1] Department of Physics, Indian Institute of Technology (BHU), Varanasi
关键词
Hybrid insitu composites; Direct melt reaction; Al3Zr; ZrB2; Scanning electron microscopy; Mechanical properties; ALUMINUM-MATRIX COMPOSITES; SLIDING WEAR BEHAVIOR; IN-SITU FABRICATION; TENSILE PROPERTIES; TEMPERATURE; PARAMETERS; GRAPHITE; AL2O3; AL3ZR; TIB2;
D O I
10.1016/j.jallcom.2015.07.096
中图分类号
O64 [物理化学(理论化学)、化学物理学];
学科分类号
070304 ; 081704 ;
摘要
Present study outlines the effect of ZrB2 particles variation on the morphology and mechanical properties of (ZrB2+Al3Zr)/AA5052Al alloy composites. Composites with varying amount of ZrB2 particles have been produced by direct melt reaction (DMR) technique. These composites have been characterized by X-ray diffractometer (XRD) and energy-dispersive spectroscopy (EDS) to confirm the presence of ZrB2 and Al3Zr particles. Optical microscopy (OM) and scanning-electron microscopy (SEM) have been used to understand the morphology. To see the effect of ZrB2 variation on mechanical properties, hardness and tensile properties have been evaluated. The XRD and EDS results confirm the successful formation of ZrB2 particles in matrix of AA5052Al alloy. SEM and TEM studies exhibit that ZrB2 particles are mostly in hexagonal and some rectangular shape while Al3Zr particles are in polyhedron and rectangular shapes. Most of ZrB2 particles are within a size range of 10-190 nm. Interface region is free of any impurity. OM studies show grain refinement of AA5052Al alloy matrix with formation of second phase ZrB2 particles. Tensile results indicate that the UTS and YS improve up to 3 vol.% of ZrB2 but beyond this composition a decreasing trend is observed. The strength coefficient increases with increase in ZrB2 particles up to 3 vol.% in the Al3Zr/Al alloy composites, whereas strain hardening decreases. While beyond 3 vol.% ZrB2 particles in the Al3Zr/Al alloy composite, opposite trend is observed in strength coefficient and strain hardening. Percentage elongation also improves with 1vol.% ZrB2, but further addition of ZrB2 shows an adverse effect. However, a continuous increasing trend has been observed in bulk hardness. Fracture studies show facets of Al3Zr particles and dimples of matrix, but with inclusion of ZrB2 dimple size decreases. Increase in ZrB2 leads to quasi cleavage fracture and debonding of ZrB2 clusters. (C) 2015 Elsevier B.V. All rights reserved.
引用
收藏
页码:174 / 183
页数:10
相关论文
共 50 条
  • [41] Effect of friction stir welding on microstructure, mechanical and wear properties of AA6061/ZrB2 in situ cast composites
    Dinaharan, I.
    Murugan, N.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2012, 543 : 257 - 266
  • [42] Effect of ZrB2 powders on densification, microstructure, mechanical properties and thermal conductivity of ZrB2-SiC ceramics
    Yuan, Jin-Hao
    Liu, Qiu-Yu
    You, Yang
    Zeng, Ling-Yong
    Bai, Ming-Wen
    Blackburn, Lewis R.
    Guo, Wei-Ming
    Lin, Hua-Tay
    CERAMICS INTERNATIONAL, 2021, 47 (11) : 15843 - 15848
  • [43] Toughening Effect of ZrB2 in Al2O3-ZrB2 Nanocomposite Ceramics
    Wang Xiaomin
    La Peiqing
    Wang Bingjun
    Yang Guolai
    RARE METAL MATERIALS AND ENGINEERING, 2016, 45 (07) : 1714 - 1718
  • [44] Effect of ZrB2 on the microstructure, mechanical and tribological properties of Mo-Si-B matrix composites
    Zhu, Zongxiao
    Wang, Xiaowen
    Wang, Linjun
    Zhu, Shengyu
    Cheng, Jun
    Guo, Jie
    Tan, Hui
    Yang, Jun
    CERAMICS INTERNATIONAL, 2023, 49 (15) : 24681 - 24689
  • [45] Microstructure and properties of 6111Al matrix composites reinforced by the cooperation of in situ ZrB2 particles and Y
    Qian, Wei
    Zhao, Yutao
    Kai, Xizhou
    Yan, Yufei
    Gao, Xu
    Jin, Liwei
    JOURNAL OF ALLOYS AND COMPOUNDS, 2020, 829 (829)
  • [46] Effect of powder processing and alloying additions (Al/ZrB2) on the microstructure, mechanical and electrical properties of Cu
    Shaik, Mahammad Ali
    Golla, Brahma Raju
    Khaple, Shivkumar
    ADVANCED POWDER TECHNOLOGY, 2021, 32 (09) : 3314 - 3323
  • [47] Toughening of ZrB2-SiC ceramics with the microstructure ZrB2/Zr-Al-C fibrous monolith
    Guo, Qilong
    Li, Junguo
    Shen, Qiang
    Zhang, Lianmeng
    SCRIPTA MATERIALIA, 2012, 66 (05) : 296 - 299
  • [48] Effect of Er on Microstructure and Properties of in-situ ZrB2/A356.2 Composites
    Wang Y.
    Kai X.
    Wang X.
    Qian W.
    Zhao Y.
    Zhao, Yutao (zhaoyt@ujs.edu.cn), 1600, Cailiao Daobaoshe/ Materials Review (31): : 107 - 110and129
  • [49] Influence of ZrB2 content on properties of LaB6-ZrB2 composites
    Gao, Ruilan
    Yu, Huashun
    Han, Jiande
    Min, Guanghui
    Paderno, Y.B.
    Kuei Suan Jen Hsueh Pao/ Journal of the Chinese Ceramic Society, 2004, 32 (04): : 507 - 511
  • [50] Microstructure and mechanical properties of friction stir welding joint of in-situ ZrB2/AA7085 composites
    Miao, Chang
    Du, Chengchao
    Kai, Xizhou
    Cao, Rui
    Xu, Zhuangzhuang
    Zhao, Yutao
    APPLIED SURFACE SCIENCE, 2022, 586