Effect of ZrB2 particles on the microstructure and mechanical properties of hybrid (ZrB2 + Al3Zr)/AA5052 insitu composites

被引:89
|
作者
Gautam, Gaurav
Mohan, Anita
机构
[1] Department of Physics, Indian Institute of Technology (BHU), Varanasi
关键词
Hybrid insitu composites; Direct melt reaction; Al3Zr; ZrB2; Scanning electron microscopy; Mechanical properties; ALUMINUM-MATRIX COMPOSITES; SLIDING WEAR BEHAVIOR; IN-SITU FABRICATION; TENSILE PROPERTIES; TEMPERATURE; PARAMETERS; GRAPHITE; AL2O3; AL3ZR; TIB2;
D O I
10.1016/j.jallcom.2015.07.096
中图分类号
O64 [物理化学(理论化学)、化学物理学];
学科分类号
070304 ; 081704 ;
摘要
Present study outlines the effect of ZrB2 particles variation on the morphology and mechanical properties of (ZrB2+Al3Zr)/AA5052Al alloy composites. Composites with varying amount of ZrB2 particles have been produced by direct melt reaction (DMR) technique. These composites have been characterized by X-ray diffractometer (XRD) and energy-dispersive spectroscopy (EDS) to confirm the presence of ZrB2 and Al3Zr particles. Optical microscopy (OM) and scanning-electron microscopy (SEM) have been used to understand the morphology. To see the effect of ZrB2 variation on mechanical properties, hardness and tensile properties have been evaluated. The XRD and EDS results confirm the successful formation of ZrB2 particles in matrix of AA5052Al alloy. SEM and TEM studies exhibit that ZrB2 particles are mostly in hexagonal and some rectangular shape while Al3Zr particles are in polyhedron and rectangular shapes. Most of ZrB2 particles are within a size range of 10-190 nm. Interface region is free of any impurity. OM studies show grain refinement of AA5052Al alloy matrix with formation of second phase ZrB2 particles. Tensile results indicate that the UTS and YS improve up to 3 vol.% of ZrB2 but beyond this composition a decreasing trend is observed. The strength coefficient increases with increase in ZrB2 particles up to 3 vol.% in the Al3Zr/Al alloy composites, whereas strain hardening decreases. While beyond 3 vol.% ZrB2 particles in the Al3Zr/Al alloy composite, opposite trend is observed in strength coefficient and strain hardening. Percentage elongation also improves with 1vol.% ZrB2, but further addition of ZrB2 shows an adverse effect. However, a continuous increasing trend has been observed in bulk hardness. Fracture studies show facets of Al3Zr particles and dimples of matrix, but with inclusion of ZrB2 dimple size decreases. Increase in ZrB2 leads to quasi cleavage fracture and debonding of ZrB2 clusters. (C) 2015 Elsevier B.V. All rights reserved.
引用
收藏
页码:174 / 183
页数:10
相关论文
共 50 条
  • [31] Mechanical and thermal properties of bulk ZrB2
    Nakamori, Fumihiro
    Ohishi, Yuji
    Muta, Hiroaki
    Kurosaki, Ken
    Fukumoto, Ken-ichi
    Yamanaka, Shinsuke
    JOURNAL OF NUCLEAR MATERIALS, 2015, 467 : 612 - 617
  • [32] Effect of conditions on the dispersibility of ZrB2 particles
    Song, Jie-Guang
    Zhang, Lian-Meng
    Li, Jun-Guo
    Song, Jian-Rong
    JOURNAL OF DISPERSION SCIENCE AND TECHNOLOGY, 2007, 28 (07) : 1072 - 1076
  • [33] Hierarchical microstructure and mechanical properties of extruded ZrB2/2024Al nanocomposite
    Zhang, Z. Y.
    Yang, R.
    Chen, G.
    Zhu, Q.
    Zhao, Y. T.
    Chen, F.
    Wang, C. L.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2019, 761
  • [34] Effects of Sc on the microstructure and properties of in situ ZrB2/7085Al composites
    Cao, Rui
    Zhao, Yutao
    Kai, Xizhou
    Qian, Wei
    Huang, Luyao
    Miao, Chang
    Xu, Zhuangzhuang
    MATERIALS SCIENCE AND TECHNOLOGY, 2022, 38 (12) : 794 - 803
  • [36] Microstructure and mechanical behavior of AA2024 aluminum matrix composites reinforced with in situ synthesized ZrB2 particles
    Muralidharan, N.
    Chockalingam, K.
    Dinaharan, I.
    Kalaiselvan, K.
    JOURNAL OF ALLOYS AND COMPOUNDS, 2018, 735 : 2167 - 2174
  • [37] Correction: Influence of Electromagnetic Ultrasound Dual Field Coupling In Situ Synthesis of (ZrB2 + Al3Zr)/AA6016 Composites on the Structure and Properties
    Lei Jiao
    Zhiwen Wang
    Yutao Zhao
    Baowang Wang
    Hui Li
    International Journal of Metalcasting, 2023, 17 : 1754 - 1754
  • [38] HIGH TEMPERATURE MECHANICAL PROPERTIES OF ZRB2 AND ZRB2+SIC
    RHODES, WH
    KALISH, D
    CLOUGHER.EV
    AMERICAN CERAMIC SOCIETY BULLETIN, 1970, 49 (04): : 382 - &
  • [39] Effect of rotational speed on friction stir welding microstructure and properties of cast and rolled (ZrB2 + Al3Zr) particle-reinforced aluminum matrix composites
    Wang, Gonglin
    Li, Hui
    Jiao, Lei
    Zhang, Xiaolong
    Wang, Xinyao
    Shen, Weiming
    Zhang, Cheng
    JOURNAL OF MATERIALS SCIENCE, 2024,
  • [40] Effect of preset interfacial ZrB2 particles on the microstructure and properties of C/C-AlSi composites
    Feng, Wei
    Tang, Chengwei
    Liu, Lei
    Chen, Jian
    Zhang, Yang
    Yao, Xiyuan
    Zuo, Donglin
    Liu, Feilong
    JOURNAL OF COMPOSITE MATERIALS, 2021, 55 (23) : 3203 - 3211