Effect of ZrB2 particles on the microstructure and mechanical properties of hybrid (ZrB2 + Al3Zr)/AA5052 insitu composites

被引:89
|
作者
Gautam, Gaurav
Mohan, Anita
机构
[1] Department of Physics, Indian Institute of Technology (BHU), Varanasi
关键词
Hybrid insitu composites; Direct melt reaction; Al3Zr; ZrB2; Scanning electron microscopy; Mechanical properties; ALUMINUM-MATRIX COMPOSITES; SLIDING WEAR BEHAVIOR; IN-SITU FABRICATION; TENSILE PROPERTIES; TEMPERATURE; PARAMETERS; GRAPHITE; AL2O3; AL3ZR; TIB2;
D O I
10.1016/j.jallcom.2015.07.096
中图分类号
O64 [物理化学(理论化学)、化学物理学];
学科分类号
070304 ; 081704 ;
摘要
Present study outlines the effect of ZrB2 particles variation on the morphology and mechanical properties of (ZrB2+Al3Zr)/AA5052Al alloy composites. Composites with varying amount of ZrB2 particles have been produced by direct melt reaction (DMR) technique. These composites have been characterized by X-ray diffractometer (XRD) and energy-dispersive spectroscopy (EDS) to confirm the presence of ZrB2 and Al3Zr particles. Optical microscopy (OM) and scanning-electron microscopy (SEM) have been used to understand the morphology. To see the effect of ZrB2 variation on mechanical properties, hardness and tensile properties have been evaluated. The XRD and EDS results confirm the successful formation of ZrB2 particles in matrix of AA5052Al alloy. SEM and TEM studies exhibit that ZrB2 particles are mostly in hexagonal and some rectangular shape while Al3Zr particles are in polyhedron and rectangular shapes. Most of ZrB2 particles are within a size range of 10-190 nm. Interface region is free of any impurity. OM studies show grain refinement of AA5052Al alloy matrix with formation of second phase ZrB2 particles. Tensile results indicate that the UTS and YS improve up to 3 vol.% of ZrB2 but beyond this composition a decreasing trend is observed. The strength coefficient increases with increase in ZrB2 particles up to 3 vol.% in the Al3Zr/Al alloy composites, whereas strain hardening decreases. While beyond 3 vol.% ZrB2 particles in the Al3Zr/Al alloy composite, opposite trend is observed in strength coefficient and strain hardening. Percentage elongation also improves with 1vol.% ZrB2, but further addition of ZrB2 shows an adverse effect. However, a continuous increasing trend has been observed in bulk hardness. Fracture studies show facets of Al3Zr particles and dimples of matrix, but with inclusion of ZrB2 dimple size decreases. Increase in ZrB2 leads to quasi cleavage fracture and debonding of ZrB2 clusters. (C) 2015 Elsevier B.V. All rights reserved.
引用
收藏
页码:174 / 183
页数:10
相关论文
共 50 条
  • [21] Mechanical and Tribological characteristics of AA6082/ZrB2 composites
    Manikandan, Arumugam
    Omkumar, Meenakshi Sundaram
    Mohanavel, Vinayagam
    Manikandan, Arumugam (skpvm.2020@gmail.com), 1600, Walter de Gruyter GmbH (63): : 962 - 965
  • [22] Effects of ZrB2 powders on microstructure and mechanical properties of ZrB2-SiCw ceramics
    Xu, Liang
    Liu, Qiu-Yu
    Zhou, Yu-Zhang
    Guo, Wei-Ming
    Zhang, Yan
    You, Yang
    Lin, Hua-Tay
    CERAMICS INTERNATIONAL, 2022, 48 (20) : 31060 - 31064
  • [23] Influence of Electromagnetic Ultrasound Dual Field Coupling In Situ Synthesis of (ZrB2 + Al3Zr)/AA6016 Composites on the Structure and Properties
    Jiao Lei
    Wang Zhiwen
    Zhao Yutao
    Wang Baowang
    Li Hui
    INTERNATIONAL JOURNAL OF METALCASTING, 2023, 17 (03) : 1736 - 1753
  • [24] Effect of ZrB2 on the ablation properties of carbon composites
    Li, XT
    Shi, JL
    Zhang, GB
    Zhang, H
    Guo, QG
    Liu, L
    MATERIALS LETTERS, 2006, 60 (07) : 892 - 896
  • [25] Influence of Electromagnetic Ultrasound Dual Field Coupling In Situ Synthesis of (ZrB2 + Al3Zr)/AA6016 Composites on the Structure and Properties
    Lei Jiao
    Zhiwen Wang
    Yutao Zhao
    Baowang Wang
    Hui Li
    International Journal of Metalcasting, 2023, 17 : 1736 - 1753
  • [26] Effect of In-situ Synthesized ZrB2 Content on Microstructure and Properties of SiC-ZrB2 Composites
    Huang, Nan
    Han, Lingfeng
    Zhang, Cuiping
    Yue, Xinyan
    Ru, Hongqiang
    Wang, Wei
    Kuei Suan Jen Hsueh Pao/Journal of the Chinese Ceramic Society, 2021, 49 (12): : 2589 - 2594
  • [27] In situ synthesis and properties of Zr2Al3C4/ZrB2 composites
    Guo Qilong
    Yang Yahui
    Li Junguo
    Shen Qiang
    Zhang Lianmeng
    MATERIALS & DESIGN, 2011, 32 (8-9) : 4289 - 4294
  • [28] Strengthening mechanisms of (Al3Zrmp + ZrB2np)/AA5052 hybrid composites
    Gautam, G.
    Kumar, N.
    Mohan, A.
    Gautam, R. K.
    Mohan, S.
    JOURNAL OF COMPOSITE MATERIALS, 2016, 50 (29) : 4123 - 4133
  • [29] Tribology of Insitu Zn-Al/ZrB2 Composites in Reciprocating Motion
    Kumar, Vineet
    Mohan, Sunil
    Gautam, Gaurav
    Mohan, Anita
    INTERNATIONAL JOURNAL OF METALCASTING, 2023, 17 (01) : 182 - 194
  • [30] Tribology of Insitu Zn-Al/ZrB2 Composites in Reciprocating Motion
    Vineet Kumar
    Gaurav Gautam
    Anita Mohan
    Sunil Mohan
    International Journal of Metalcasting, 2023, 17 : 182 - 194