Simulation of particle bed breakage by slow compression and impact using a DEM particle replacement model

The present work introduces a particle replacement model implemented in the commercial software EDEM to describe breakage of particles. Several model parameters were initially estimated on the basis of single-particle breakage tests on iron ore pellets. The model was then used to simulate breakage of particle beds by both slow compression and impact. Model predictions were compared to experiments in terms of compressive force versus packing density, breakage probability of the particles versus compressive force applied to the bed, and the product size distribution in compression and impact. The model showed the expected trends as well as some agreement with the measured product size distributions both from confined and unconfined stressing conditions of the bed of particles, being a simple and effective approach to describe breakage in systems where particles are stressed as assemblies. (C) 2020 The Society of Powder Technology Japan. Published by Elsevier B.V. and The Society of Powder Technology Japan. All rights reserved.