Investigation on the burr formation mechanism in micro cutting

被引：83
|
作者：
Wu, Xian [1 ]
Li, Liang [1 ]
He, Ning [1 ]
机构：
[1] Nanjing Univ Aeronaut & Astronaut, Coll Mech & Elect Engn, Nanjing, Jiangsu, Peoples R China
来源：
PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY | 2017年 / 47卷
基金：
中国国家自然科学基金;
关键词：
Micro cutting; Burr formation; Stress distribution; Cutting edge radius; RAKE ANGLE; THICKNESS; SIZE;
D O I：
10.1016/j.precisioneng.2016.08.004
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
It is desirable to minimize burr formation for improving part quality. This paper presents an investigation on the burr formation mechanism in micro cutting by taking into consideration the stress distribution around the cutting edge arc. The influences of the uncut chip thickness and the cutting edge radius on burr formation were investigated. Poisson burr is attributed to the side flow of the stagnation material at the bottom of the cutting edge arc. The stress distribution at the cutting edge arc has great influence on Poisson burr formation. The burr height decreases to the minimum value and then increases with reducing the uncut chip thickness due to the change of the maximum stress distribution. An optimum machining strategy also is suggested in micro milling of snake-shaped groove microstructure. (C) 2016 Elsevier Inc. All rights reserved.
引用
收藏
页码：191 / 196
页数：6
相关论文
共 50 条
  • [41] Finite element simulation for burr formation near the exit of orthogonal cutting
    W. J. Deng
    W. Xia
    Y. Tang
    The International Journal of Advanced Manufacturing Technology, 2009, 43 : 1035 - 1045
  • [42] Studying the effects of cutting parameters on burr formation and deformation of hierarchical micro-structures in ultra-precision raster milling
    Zhao, Wei
    Wang, Haitao
    Chen, Wei
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2019, 101 (5-8) : 1133 - 1141
  • [43] Improved analytical prediction of burr formation in micro end milling
    Zhang, Xuewei
    Yu, Tianbiao
    Wang, Wanshan
    Zhao, Ji
    INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, 2019, 151 : 461 - 470
  • [44] Investigation of burr formation and tool wear in micromilling operation of duplex stainless steel
    Silva, Leticia Cristina
    da Silva, Marcio Bacci
    PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY, 2019, 60 : 178 - 188
  • [45] Studying the effects of cutting parameters on burr formation and deformation of hierarchical micro-structures in ultra-precision raster milling
    Wei Zhao
    Haitao Wang
    Wei Chen
    The International Journal of Advanced Manufacturing Technology, 2019, 101 : 1133 - 1141
  • [46] Analytical Modeling and Experimental Investigation of Burr Formation in Grinding
    Sudermann, H.
    Reichenbach, I. G.
    Aurich, J. C.
    BURRS - ANALYSIS, CONTROL AND REMOVAL: PROCEEDINGS OF THE CIRP INTERNATIONAL CONFERENCE ON BURRS, 2009, 2010, : 63 - 71
  • [47] Experimental investigation of top burr formation in high-speed micro-end milling of titanium alloy
    Bandapalli, Chakradhar
    Singh, Kundan Kumar
    Sutaria, Bharatkumar Mohanbhai
    Bhatt, Dhananjay Vishnuprasad
    MACHINING SCIENCE AND TECHNOLOGY, 2018, 22 (06) : 989 - 1011
  • [48] Study on Burr Formation in Face Milling of Stainless Steel with Chamfered Cutting Tool
    Jing, L. L.
    An, Q. L.
    Chen, M.
    SURFACE FINISHING TECHNOLOGY AND SURFACE ENGINEERING, 2008, 53-54 : 83 - 88
  • [49] Study on micro cutting fundamentals considering the cutting edge radius and the workpiece material in micro end milling
    Li, Yang
    Cheng, Xiang
    Ling, Siying
    Zheng, Guangming
    Liu, Huanbao
    Wang, Fei
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART E-JOURNAL OF PROCESS MECHANICAL ENGINEERING, 2021, 235 (01) : 93 - 102
  • [50] Prediction of Burr Formation in Fabricating MEMS Components by Micro End Milling
    Ali, Mohammad Yeakub
    Omar, Mohd Aliff
    Othman, Khairul Irman
    Hung, Wayne N. P.
    NEMS/MEMS TECHNOLOGY AND DEVICES, 2009, 74 : 247 - +
12345