TESTING SYSTEM SET-UP TO EVALUATE ACOUSTIC INDUCED VIBRATION

被引：0

作者：

Mann, . J. Adin, III ^{[1
]}

Eilers, Daniel ^{[1
]}

Jackson, Trent ^{[1
]}

Swindell, Rob ^{[2
]}

Middleton, Christopher ^{[2
]}

Arnett, David ^{[3
]}

Horder, Nicolas ^{[4
]}

Izuchi, Hisao ^{[5
]}

Evans, Geoff ^{[6
]}

机构：

[1] Fisher Controls Int LLC, Emerson Proc Management, Marshalltown, IA USA

[2] Wood Grp Kenny, Southampton, Hants, England

[3] Chevron Energy Technol Co, Houston, TX USA

[4] Xodus Grp, Aberdeen, Scotland

[5] Chiyoda Corp, Yokohama, Kanagawa, Japan

[6] BP Explorat & Prod Co Ltd, Sunbury On Thames, Middx, England

来源：

PROCEEDINGS OF THE ASME PRESSURE VESSELS AND PIPING CONFERENCE, 2016, VOL 4 | 2017年

关键词：

D O I：

暂无

中图分类号：

TH [机械、仪表工业];

学科分类号：

0802 ;

摘要：

A consortium of companies is collaborating in a Joint Industry Project (JIP) for Acoustic Induced Vibration (MV). Laboratory testing is one of the work areas of the JIP. The goals of the tests are to evaluate typical pipe fittings for AIV induced fatigue, to rank order their AIV risk and to obtain data for validation of computational models. An NPS6x8 (6R8) pressure safety valve was the flow and noise input to a 10S piping system, which consisted of an NPS12 tailpipe input into an NPS12x20 tee. Small bore connectors (SBCs) were included in both the NPS12 tailpipe and the NPS20 header. The type of fitting used as the connection between the SBC and the pipe was varied. The system was operating in a Carucci-Mueller acoustic power of around 175 dB. Vibration acceleration response of the system was measured, and dynamic strain data was also gathered to evaluate fatigue life. The piping and data acquisition system setup will be discussed along with the type of results that are being obtained.

引用

页数：5

共 50 条

[1] System restoration guidelines: How to set-up, conduct, and evaluate a drill
Willson, JD
IEEE TRANSACTIONS ON POWER SYSTEMS, 1996, 11 (03) : 1619 - 1628
[2] Fabrication of experimental set-up and testing
Department of Mechanical Engineering, Sri Ranganathar Institute of Engineering and Technology, Coimbatore
Tamil Nadu, India
不详
Tamil Nadu, India
不详
SpringerBriefs Appl. Sci. Technol., 9783319029849 (35-49):
[3] SET-UP FOR TESTING MEMBRANOUS FILTERS
BEDOV, RP
KATSMAN, SY
SNEGIREVA, NS
BOGINO, NA
KHIMIKO-FARMATSEVTICHESKII ZHURNAL, 1976, 10 (11): : 135 - 137
[4] Set-up and Implementation of a Recuperative Stand for Testing a Filtering and Regeneration System
Bitoleanu, Alexandru
Popescu, Mihaela
Suru, Vlad Constantin
Puncea, Oana
2017 INTERNATIONAL CONFERENCE ON ELECTROMECHANICAL AND POWER SYSTEMS (SIELMEN), 2017, : 489 - 494
[5] NONSTATIONARY RANDOM VIBRATION OF A NON-LINEAR SYSTEM WITH A SET-UP SPRING
AHMADI, G
ACUSTICA, 1981, 48 (01): : 50 - 53
[6] Experimental Set-up for Testing a Refrigerator.
Seck, T.
Godin, M.
Debray, E.
1600, (20):
[7] Set-up for Testing Shells in a Vacuum.
Tsoi, N.G.
Freger, G.E.
Problemy Prochnosti, 1973, 5 (09): : 112 - 114
[8] CRYOGENIC VIBRATION TEST SET-UP FOR SPACE QUALIFICATION
WILDEMAN, KJ
PLOEGER, GR
CRYOGENICS, 1989, 29 (05) : 559 - 562
[9] Testbed Set-up for Underwater Acoustic Communication and Networks
Kadam, Bhushan
Dhongdi, Sarang
Maurya, Pramod
2024 IEEE APPLIED SENSING CONFERENCE, APSCON, 2024,
[10] Classification set-up of a complex system
Krasnopoyasovskij, A.S.
Upravlyayushchie Sistemy i Mashiny, 2002, (01): : 9 - 16

← 1 2 3 4 5 →