Novel pre-treatments to control bromate formation during ozonation

Worldwide water shortage increase and water quality depletion from microbial and chemical compounds, pose significant challenges for today's water treatment industry. Both the development of new advanced oxidation technologies, but also the enhancement of existing conventional technologies is of high interest. This study tested improvements to conventional ozonation that reduce the formation of the oxidation-by-product bromate, while maintaining the effectiveness for removal emerging contaminants (atrazine). MnO4-, ClO2-, ClO2, ClO-, CH3COOO-, HSO5- or S2O5-2 with NH4+ were tested as pre-treatments to ozonation of ground water. Each oxidant and NH4+ were added in a single stage or separately prior to zonation. To the best of our knowledge, this is the first study that has tested all the above-mentioned oxidants for the same water matrix. Based on our results, the most promising pre-treatments were MnO4- NH4+, ClO2- NH4+ and ClO2 NH4+. MnO4- NH4+ was the only pretreatment that did not inhibit atrazine removal. When compared with the previously proposed Cl-2/NH4+ pre-treatment, MnO4- + NH4+ was found as effective for preventing BrO3- formation, while atrazine removal was higher. In addition, MnO4- +NH4+ can be added in a single stage (compared to the 2 stage addition of Cl-2/NH4+) without causing the formation of potentially harmful chlorination-by-products. (C) 2016 Elsevier B.V. All rights reserved.