The Effect of Strain Rate on the Stress Relaxation of the Pig Dermis: A Hyper-Viscoelastic Approach

The understanding of strain rate-dependent mechanical properties of the skin is important for accurate prediction of its biomechanics under different loading conditions. This study investigated the effect of strain rate, i.e., 0.025/s (low), 0.5/s (medium), and 1.25/s (high), ranging in the physiological loading rate of connective tissue, on the stress-relaxation response of the porcine dermis. Results show that in the initial phase of the relaxation, the value of stress relaxation (extent of relaxation) was found higher for high strain rate. However, the equilibrium stress was found strain rate independent. A Mooney-Rivlin-based five-term quasi-linear viscoelastic (QLV) model was proposed to determine the effect of strain rate on the stress-relaxation behavior of the porcine dermis. The value of relaxation modulus G(1) and G(2) were found higher for the high strain rate, whereas the reverse trend was observed for G(3), G(4,) and G(5). Moreover, the value of time constants tau(1),tau(2),tau(3) tau(4), and tau(5) were found higher for low strain rate. Statistical analysis shows no significant difference in the values of G5, s4, and s5 among the three strain rates. The proposed model was found capable to fit the stress-relaxation response of skin with great accuracy, e.g., root-mean-squared-error (RMSE) value equal to 0.015 +/- 0.00012 MPa. Moreover, this hyper-viscoelastic model can be utilized: to quantify the effects of age and diseases on the skin; to simulate the stresses on sutures during large wound closure and impact loading.