Crack sensitivity of bolted metallic and polymeric joints

被引：25

作者：

Abd-Elhady, Amr A. ^{[1
]}

Sallam, Hossam El-Din M. ^{[2
]}

机构：

[1] Helwan Univ, Fac Engn, Mech Design Dept, Cairo 11718, Egypt

[2] Jazan Univ, Dept Civil Engn, Jazan 706, Saudi Arabia

来源：

ENGINEERING FRACTURE MECHANICS | 2015年 / 147卷

关键词：

Bolted metallic joint; Bolted composite joint; Failure modes; Stress intensity factors; Crack tip deformation; STRESS INTENSITY FACTORS; DOUBLE-LAP JOINTS; NET-TENSION STRENGTH; CLAMPING FORCE; DAMAGE; PREDICTION; BEHAVIORS; ELEMENTS; FAILURE; MODEL;

D O I：

10.1016/j.engfracmech.2015.08.005

中图分类号：

O3 [力学];

学科分类号：

08 ; 0801 ;

摘要：

The effect of the presence of crack located at the fastener hole surface of bolted metallic (mild steel) and polymeric (Cross-ply [0/90](4s) glass fiber reinforced epoxy composite laminate) joints on their ultimate strength and converting their mode of failure has been studied numerically and experimentally. The present results showed that, the failure mode of bolted metallic joint is more sensitive to the presence of the crack than that of bolted composite joint. The critical crack length at which the bolted metallic joint failure mode changed from bearing failure to tensile failure has been recognized. (C) 2015 Elsevier Ltd. All rights reserved.

引用

页码：55 / 71

页数：17

共 37 条

[1] Strength prediction in CFRP woven laminate bolted single-lap joints under quasi-static loading using XFEM [J].

Ahmad, H. ;

Crocombe, A. D. ;

Smith, P. A. .

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, 2014, 66 :82-93

[2] Strength prediction in CFRP woven laminate bolted double-lap joints under quasi-static loading using XFEM [J].

Ahmad, H. ;

Crocombe, A. D. ;

Smith, P. A. .

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, 2014, 56 :192-202

[3] Failure of unidirectional-woven composite laminated pin-loaded joints [J].

Ahn, HS ;

Kweon, JH ;

Choi, JH .

JOURNAL OF REINFORCED PLASTICS AND COMPOSITES, 2005, 24 (07) :735-752

[4]

[Anonymous], 2010, D79010 ASTM

[5]

[Anonymous], 2014, Test Method for Tensile Properties of Orientation Fiber Reinforced Polymer Matrix Composite Materials

[6]

[Anonymous], 2013, D5961D5961M13 ASTM

[7]

[Anonymous], 2013, Standard Test Methods for Tension Testing of Metallic Materials, DOI [10.13140/RG.2.2.13919.41125, DOI 10.13140/RG.2.2.13919.41125]

[8]

[Anonymous], 2007, ABAQUS AN US MAN VER

[9]

ASTM, 2010, D69510 ASTM

[10]

ASTM, 2012, ASTM D 5379/D5379M-12

← 1 2 3 4 →