Robustness of Bolted-Angle Connections against Progressive Collapse: Experimental Tests of Beam-Column Joints and Development of Component-Based Models

被引:112
作者
Yang, Bo [1 ,2 ]
Tan, Kang Hai [2 ]
机构
[1] Chongqing Univ, Coll Civil Engn, Chongqing 400044, Peoples R China
[2] Nanyang Technol Univ, Sch Civil & Environm Engn, Singapore 639798, Singapore
关键词
Structural failures; Progressive collapse; Bolted connections; Beam columns; Joints; Experimentation; Tests; Bolted-angle connections; Beam-column joints; Catenary action; Experimental tests; Component-based model; Steel; Frame analyses; ELEVATED-TEMPERATURES; STEEL; PERFORMANCE; STIFFNESS; AMBIENT; FIRE;
D O I
10.1061/(ASCE)ST.1943-541X.0000749
中图分类号
TU [建筑科学];
学科分类号
0813 ;
摘要
Several structural collapse incidents indicate that failure usually starts from beam-column joints exposed to abnormal loads, especially for steel and composite structures. If the connections are sufficiently robust and there is adequate axial restraint from adjoining structures, catenary action forms in the beams and slabs, causing alternate load paths when affected columns are severely damaged, and resulting in large deformations in the beams and slabs. This paper presents experimental results of bolted-angle beam-column joints under a middle column-removal scenario. Three types of connectionsincluding (1) web cleat, (2) top and seat angle, and (3) top and seat with web angle connectionswere investigated, and three angle thicknesses (8, 10, and 12 mm) were tested. The results of the nine experimental tests conducted demonstrate the ductility and load-carrying capacities of these three connection types with different angle thicknesses in catenary action mode. When the angle thickness increases, the failure mode changes from angle fracture to bolt fracture. A component-based model is also developed to predict the behavior of bolted-angle beam-column joints up to total failure. The validation study indicates that the proposed models can represent the key responses of bolted-angle beam-column joints under a middle column-removal scenario, including the formation of flexural action at small deformation stage, the development of catenary action at large deformation stage, and fractures of the connection components at the last stage. Based on the proposed joint model, frame analyses are conducted. The analytical results of the frame models demonstrate that the conducted joint tests could represent the behavior of prototype steel frames against progressive collapse. The effect of horizontal restraint stiffness, which is critical to the development of catenary action, is also investigated.
引用
收藏
页码:1498 / 1514
页数:17
相关论文
共 29 条
  • [21] Performance of Low-yield Strength Plates in Beam-column Connections against Progressive Collapse
    Karimian, Ahmad
    Armaghani, Arastoo
    Behravesh, Alaeddin
    [J]. KSCE JOURNAL OF CIVIL ENGINEERING, 2019, 23 (01) : 335 - 345
  • [22] Performance of Low-yield Strength Plates in Beam-column Connections against Progressive Collapse
    Ahmad Karimian
    Arastoo Armaghani
    Alaeddin Behravesh
    [J]. KSCE Journal of Civil Engineering, 2019, 23 : 335 - 345
  • [23] Experimental study on performance of prestressed concrete beam-column substructure against progressive collapse
    Deng X.
    Li Z.
    Weng Y.
    Yu X.
    Qian K.
    [J]. Jianzhu Jiegou Xuebao/Journal of Building Structures, 2019, 40 (08): : 71 - 78
  • [24] The development of a component-based model for extended endplate joints in fire-induced progressive collapse scenarios
    Guo, Zhan
    Li, Guokeng
    Chen, Ying
    Zhang, Xiaoyong
    [J]. JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH, 2025, 225
  • [25] Rotational Capacity of Bolted Double-Web-Angle Beam-Column Gravity Connections through Full-Scale Experimental Testing
    Beland, Thierry
    Tremblay, Robert
    Hines, Eric M.
    Fahnestock, Larry A.
    [J]. JOURNAL OF STRUCTURAL ENGINEERING, 2020, 146 (07)
  • [26] Experimental and numerical study on extended endplate beam-column joints after high temperature to resist progressive collapse
    Guo, Zhan
    Yang, Kai
    Xing, Zhiquan
    Nie, Zhenhua
    Chen, Yu
    [J]. JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH, 2024, 219
  • [27] Robustness analysis of dynamic progressive collapse of precast concrete beam-column assemblies using dry connections under uniformly distributed load
    Zhao, Zidong
    Cheng, Xiaowei
    Li, Yi
    Diao, Mengzhu
    Liu, Yilin
    Zhang, Weijing
    [J]. ENGINEERING STRUCTURES, 2025, 323
  • [28] Component-Based Modeling for Steel and Composite Beam-Column Joints Subjected to Quasi-Static and Impact Loads under Column Removal Scenarios
    Chen, Kang
    Yang, Bo
    [J]. JOURNAL OF STRUCTURAL ENGINEERING, 2023, 149 (11)
  • [29] STEEL BEAM-TO-COLUMN EXTENDED END PLATE JOINTS AT ELEVATED TEMPERATURE: EXPERIMENTAL, NUMERICAL AND COMPONENT-BASED APPROACHES
    Qian, Z. H.
    Tan, K. H.
    [J]. PROCEEDINGS OF THE 12TH INTERNATIONAL CONFERENCE ON INSPECTION APPRAISAL REPAIRS AND MAINTENANCE OF STRUCTURES, VOLS 1 AND 2, 2010, : 81 - 96